Radio Operations

Basic Operations

English

∗ The factory default setting is “BASSÅF 60Î”.

(Adjustment 60/100/200 Hz)

4. Press the [A] or [D] button to select

“BASSÅQÎ”.

Turninng the [Rotary] knob clockwise or

counterclockwise to select the Q-curve.

Adjusting the fader

1.	Press the [Audio Mode] button and select
	“FADER”.
2.	Turning the [Rotary] knob clockwise empha-
	sizes the sound from the front speakers;
	turning it counterclockwise emphasizes the

FM reception

For enhanced FM performance the ®

tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.

●Quick tuning:

Press and hold the [A] or [D] button for 1 second or longer to tune in a station.

●Step tuning:

Press the [A] or [D] button to manually tune in a station.

English

∗ The factory default setting is “BASSÅQ 1Î”.

(Adjustment 1/1.25/1.5/2)

5. When the adjustment is complete, press the

[Audio Mode] button several times until the

function mode is reached.

sound from the rear speakers.

∗ The factory default setting is “FADER 0”. (Ad-

justment range: F12 to R12)

3. When the adjustment is complete, press the

[Audio Mode] button several times until the

function mode is reached.

Listening to the radio

1.	Press the [Function] button and select the ra-
	dio mode. The frequency in the display.
2.	Press the [Band] button and select the radio
	band. Each time the button is pressed, the ra-
	dio reception band changes in the following

Preset tuning

A total of 24 preset positions (6-FM1, 6-FM2, 6- FM3, 6-AM) exists to store individual radio sta- tions in memory.

Adjusting the treble (Gain, Frequency)

This adjustment can be performed when the Z- Enhancer Plus is set to “USER CUSTOM”.

Adjusting MAGNA BASS EX

The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment

order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the [A] or [D] button to tune in the

desired station.

1.Press the [Band] button and select the de- sired band (FM or AM).

2.Turning the [Preset] knob to select a station to start with.

1.Press the [Audio Mode] button and select “TREBLE”.

2.Turning the [Rotary] knob clockwise empha- sizes the treble; turning it counterclockwise attenuates the treble.

∗The factory default setting is “TREBÅG 0Î”. (Adjustment range: –6 to +6)

3.Press the [A] or [D] button to select “TREBÅFREQÎ”.

Turninng the [Rotary] knob clockwise or counterclockwise to select the frequency.

∗The factory default setting is “TREBÅF 10KÎ”. (Adjustment 10 kHz/15 kHz)

4.When the adjustment is complete, press the [Audio Mode] button several times until the function mode is reached.

∗Press and hold the [Z-enhancer+] button for 1 second or longer, then the setting parameter of bass/treble will be initialized with a display “Z-EHCR+FLAT”.

function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗ The factory default setting is off.

1.Press and hold the [Audio Mode] button for 1 second or longer to turn on the MAGNA BASS EX effect. “M-B EX” lights in the dis- play.

2.Press and hold the [Audio Mode] button for 1 second or longer to turn off the MAGNA BASS EX effect. “M-B EX” goes off from the display.

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the [Band] button and select the de- sired band (FM or AM).

∗If “MANU” is lit in the display, press and hold the [Band] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available.

2.Press the [A] or [D] button to automati- cally seek a station.

When the [D] button is pressed, the station is sought in the direction of higher frequencies; if the [A] button is pressed, the station is sought in the direction of lower frequencies.

Manual tuning

Manual memory

1.Press the [Band] button and select the de- sired band (FM or AM).

2.Press [A] or [D] button to select a station to be put into memory. Then, press the [Memory] button.

3.Turning the [Preset] knob to select a preset memory number to be registered.

4.Press and hold the [Memory] button (for about 2 seconds).

∗After a registration is completed, “CH” indica- tion becomes lit in the display from the blink- ing status.

Auto store

Auto store is a function for storing up to 6 sta- tions that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.

Adjusting the balance

1.Press the [Audio Mode] button and select “BALANCE”.

2.Turning the [Rotary] knob clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “BALANCE 0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [Audio Mode] button several times until the function mode is reached.

There are 2 ways available: Quick tuning and step tuning.

When you are in the step tuning mode, the fre- quency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.

1.Press the [Band] button and select the de- sired band (FM or AM).

∗If “MANU” is not lit in the display, press and hold the [Band] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.

2.Tune into a station.

1.Press the [Band] button and select the de- sired band (FM or AM).

2.Press and hold the [Scan] button for 2 sec- onds or longer. The stations with good recep- tion are stored automatically to the preset channels.

12 DMZ637MP

DMZ637MP 13