Western Digital WDBLGT0160KBK Edit an iSCSI Target, Click Create Target, Click Modify Target

APPENDIX

4.Click Create this target from an existing image file to create a target from an existing image file.

Note: Use this step only if you have an existing iSCSI target image file.

a.Select the … button.

b.On the “Image file to use:” window, navigate to the location of your target image file, then click Open.

5.Select the security type for your target.





None: Does not assign security for your target.

CHAP: Assigns Challenge Handshake Authentication Protocol (CHAP) security to your target.

-If you’d like to change your User Name, click Edit. Note that the name must match your initiator CHAP name.

-Enter your Target Secret. The Target Secret is a security key that must be between 12 to 16 alphanumeric characters.

6.Click Create Target.

Edit an iSCSI Target

1.On the iSCSI Tasks pane, click Edit Target Settings.

2.Modify the required and optional settings as desired.

3.Click Modify Target.

WD SENTINEL DX4000	69
ADMINISTRATOR’S MANUAL