Teledyne 2103c installation and operation guide Control and Laboratory use

DECLARATION OF CONFORMITY

	Application of Council Directive:		89/336/EEC – The EMC Directive
			73/23/EEC – The Low Voltage Directive
		Manufacturer's Name: Teledyne Isco, Inc.
		Manufacturer's Address:	4700 Superior, Lincoln, Nebraska 68504 USA
			Mailing Address: P.O. Box 82531, Lincoln, NE 68501
	Equipment Type/Environment: Laboratory Equipment for Light Industrial/Commercial Environments
		Trade Name/Model No: 2191 Battery Module
		Year of Issue:	2001
Standards to which Conformity is Declared:			EN 61326-1998 EMC Requirements for Electrical Equipment for
				Measurement, Control, and Laboratory Use
						rmity
			EN 61010-1 Safety Requirements for Electrical Equipment for Measurement,
				Control and Laboratory use.
Standard		Description				o	Performance Criteria
						Severity Applied
EN61000-4-2		Electrostatic Discharge				Conf	B
				Level 2 - 4kV contact discharge
				Level 3 - 8kV air discharge			B
EN61000-4-3		Radiated RF Immunity			of		B
				80 MHz to 1000MHz 80% AM at 1kHz
				on
				Level 1 – 10V/m
EN61000-4-6		Conducted RF on I/O lines	Declara150 kHz to 80 MHz,				B
EN61000-4-4		Electrical Fast Transient		Levelti 1 – 1kV on I/O lines			B
EN61000-4-5		Surge on I/O Lines		1kV common mode,			B
				0.5KV differential mode
		CE		3V rms, 80% modulated
CISPR11/		RF Emissions		Group 1, Class A Industrial, Scientific, and
EN 55011				Medical Equipment

We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and Standards as of July 1, 2001.

William Foster

USA Representative

William Foster

Director of Engineering

Teledyne Isco, Inc.

4700 Superior Street

Lincoln, Nebraska 68504

Phone: (402) 464-0231

Fax: (402) 464-4543

60-2002-158

Rev A