Sherwood RD-6513 manual When selecting the DISTANCE, About the speaker distance, English

RD-6513(A) 2008.8.21 12:20 PM 페이지 37

When selecting the DISTANCE

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the DISTANCE, then press the ENTER button.

ENGLISH

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker.

Note :

• You cannot select the speakers set to "N (None)" and the subwoofer.

3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected speker as desired.

• You can set the distance within the range of 1 ~ 30 feet in 1 feet intervals.

4. Repeat the above steps 2 and 3 until the distances are all set as desired.

About the speaker distance

When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center and surround speakers should be the same distance from the main listening position as the front speakers. By entering the distance between the listening position and each speaker, the delay times of center and surround speakers are automatically adjusted to create an ideal listening environment virtually as if the center and surround speakers were at their ideal locations respectively.

37