Manual presetting
•You can store up to 30 preferred stations in the memory.
1.Tune in the desired station with auto or manual tuning.
2.Press the (MEMORY/)ENTER button.
MEM
• "MEM" is flickering for several seconds.
3. Select the desired preset number (1~30) and press the (MEMORY/)ENTER button.
•When using the NUMERIC buttons on the remote control.
Examples) For “3” :
For “15” :
For “30” : 
•The station has now been stored in the memory.
•When using the NUMERIC buttons, the station is stored automatically without pressing the (MEMORY/)ENTER button.
•A stored frequency is erased from the memory by storing another frequency in its place.
•If “MEM” goes off, start again from the above step 2.
4. Repeat the above steps1 to 3 to memorize other stations.
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off, are memorized.
•INPUT SELECTOR settings
•Surround mode settings
•Preset stations,etc.
Tuning to preset stations
•After selecting the tuner as an input source, select the desired preset number.
ENGLISH
•When using the NUMERIC buttons on the remote control. Examples) For “3” : 
For “15” :
For “30” :
25
