Teledyne 2102 installation and operation guide System Connections

Page 11

2102 Wireless Communication Module Section 1 Quick Start Guide

1.3 System Connections

Connections for the 2102 Wireless modules are described as a base module and remote module. The base wireless module allows a personal computer running Flowlink for Windows (v4.11 or later) to communicate with a remote site that is also using a wireless module. Although base and remote modules function dif- ferently, they are identical. Designed to be “plug-and-play,” the modules automatically configure themselves according to the device they are connected to.

Typical system connections are shown in Figure 1-7.

1.3.1

Base Module

The base Wireless Module connects to the computer’s COM port

 

Connections

with a communication cable (Isco Part Number 60-2004-046 or

 

 

60-5314-849).

 

 

The base module will also require 12 VDC power. The application

 

 

will determine which of the three power options you select. For a

 

 

more permanent installation using a desktop PC, an AC to DC

 

 

power converter (60-2004-057) would the the most practical

 

 

choice. Mobile data collection from a vehicle would require the 12

 

 

VDC cigarette lighter adapter (60-2004-050). For applications

 

 

where an external power source is not available, use the Model

 

 

2191 Battery Module (60-2004-006).

1.3.2

Remote 2100 Site

To configure the 2100 site with a Wireless Communication

 

Connections

Module, simply attach the module to the stack. The Wireless

 

 

Communication Module will draw power from the Battery

 

 

Module. If battery life is a concern, a second Battery Module

 

 

should be added to the stack.

 

 

Make sure the 2150 Firmware version is 1.04 or higher. Prior to

 

 

version 1.04, the unit cycled every two minutes. To change this,

 

 

the unit must be reconfigured. This is done by holding down the

 

 

Shift key and connecting through the Quick Connect dialog.

 

CAUTION

 

Reconfiguration will cause all settings and previously collected

 

data to be lost on the unit.

1.3.3 Remote

The 2102 may also be used with Teledyne Teledyne Isco’s 4100

4100/4200/6700 Site

series Flow Loggers, 4200 series Flow Meters, and 6700 series

Connections

Samplers.

 

Software versions for the 4200, 4100, and 6700 series instru-

 

ments are:

 

4100 - 1.49 or higher

 

4200 - 2.21 or higher

 

6700 - 3.22 or higher

1-5

Image 11
Contents Wireless Communication Module Page Foreword Page Table of Contents Wireless Communication ModuleList of Tables List of FiguresGetting Started Quick Start GuideItem No Description Wireless ModuleWireless Module Components Top View Components2102 Components Bottom View Wireless Module Components Bottom ViewUpper Connector Capped System Connections Remote unit cable configurations Base unit cable configurationsOverview Wireless ModuleIntroduction Wireless Module Features Applications Controls, Connectors, and IndicatorsTop/Right View Bottom/Left View Item No Name Description Technical SpecificationsControls, Connectors, and Indicators 2102 Module Technical Specifications 2102 ModuleTechnical Specifications 2191 Battery Module Technical Specifications Spread Spectrum RadioPin Name Description Wireless Module Connector PinsUnpacking Instructions Preparation and InstallationPreparing for Installation Wireless Communication Module Preparation and Installation InstallationWireless Communication Module Preparation and Installation Wireless Communication Module Preparation and Installation Testing Installation Wireless Communication Module Preparation and Installation Section Overview ProgrammingRemote Unit Configuration Base Unit ConfigurationBase Module Connect Cables Cable or Power Option Part Number Description Refer to FigWireless Communication Module Programming Cleaning MaintenanceMaintenance Overview How to Obtain ServiceWireless Communication Module Maintenance Teledyne Isco, Inc Appendix a Replacement PartsReplacement Parts Diagrams and Listings Wireless Communication Module Appendix a Replacement Parts Fig. A-1 Item No Part Number DescriptionWireless Communication Module Appendix a Replacement Parts Table Hazmat 2100 Nodes 60-2003-550 Rev Page Teledyne Isco One Year