Technical Specifications, Item No Name Description

2102 Wireless Communication Module Section 2 Introduction

2.4Technical Specifications

This section lists technical information about the 2102 Module.

•Table 2-2lists the technical specifications of the 2102.

•Table 2-3lists the technical specifications of the Spread Spectrum Radio.

•Table 2-4lists the technical specifications of the 2191 Battery Module which must be used with the Model 2102.

Item No.	Name	Description
Fig. 2-1	Name	Description
Fig. 2-1
1	Communication	Upper communication port. The connection transfers data and 12 VDC power
	Connector	to other modules. The port may also be used to connect attached modules to
		a PC running Flowlink software.

2	Connector Caps	Insert into unused communication connectors to terminate the network and
		protect them from moisture damage. When communication connectors are in
		use, the caps must be stowed as shown in Figure 2-1to protect the terminat-
		ing components inside the caps.

3	Communication	Illuminates when the module is active.
	Indicator

4	Latch Release	Push in to release the module from a stack.

5	Latch	Push in to lock the module in a stack.

6	Serial Number Label	In back - lists product ID and unit serial numbers.

7	Communication	Lower communication port. The connector transfers data and 12 VDC power
	Connector	to other modules.

Size (H⋅W⋅D)	2.9 ⋅ 11.3 ⋅ 7.5 in.	7.4 ⋅ 28.7 ⋅ 19.1 cm

Weight	2.0 lbs	0.9 kg

Material	High-impact molded polystyrene

Enclosure (self-certified)	NEMA 4X, 6P	IP 68

Power	10.2 to 16.6 VDC, 100 mA typical at 12 VDC, 1 mA standby

Typical Battery Life (one mod-	Typical: 50 days (when using two alkaline batteries)
ule)

Carrier Detect Cycle Time	4 minutes

Average Connection Time	2 minutes

Operating Temperature	0° to 140°F	-18° to 60°C

Storage Temperature	-40° to 140°F	-40° to 60°C

2-4