2102 Wireless Communication Module
Section 3 Preparation and Installation
3.3.2 Testing Installation
Note
The remote wireless module must be connected to a 2100 Series measurement module below it (or other compatible equipment) to function properly. By itself, it cannot measure anything; it is merely a radio frequency transmitter of data gen- erated by the connected measurement module.
When first powered up or after completing a connection, the remote will attempt to connect for 30 seconds. This is a good way to ensure that the unit is operating correctly. If the light does not blink for 30 seconds shortly after applying power, the unit is not operating properly.
CAUTION
User should not attempt to operate two base units within the same area. Crosstalk will result and prevent proper operation. This is not the case for the remotes, however. As many remotes as are necessary for the application may be installed.
The remote module program is updated when one of the fol- lowing conditions occurs:
•Power is recycled.
•After a successful connection with a base unit.
•After a direct connection.