Teledyne 2102 installation and operation guide Technical Specifications Spread Spectrum Radio

2102 Wireless Communication Module

Section 2 Introduction

Table 2-3 Technical Specifications – Spread Spectrum Radio

Frequency	902 to 928 MHz
Transmitter
Output Power	1 W
Typical Range
line of sight	0.5 miles (0.8 km)
from inside manhole	100 feet (30 m)
Modulation, GFSK	120 kBs - 170 kBs
Occupied bandwidth	230 kHz
Receiver
Sensitivity	-108dBm at 10-6 raw BER (bit error rate)
Selectivity	40 dB at fc ±230 kHz
	60 dB at fc ±460 kHz
Data Transmission
Error Detection	32 Bit CRC, resend on error
Data Encryption	Substitution, dynamic key
Link Throughput	115 kBaud
FCC Identifier	KNY-205-108213
DOC (Canada) Identifier	2239 102 336A

Table 2-4 Technical Specifications - 2191 Battery Module

Size (H⋅W⋅D)	6.0 ⋅ 9.6 ⋅ 7.6 in.	15.2 ⋅ 24.4 ⋅ 19.3 cm
Weight (without batteries)	3.2 lbs	1.4 kg
Material	High-impact molded polystyrene
Enclosure (self-certified)	NEMA 4X, 6P	IP 68
Batteries	6V alkaline lantern or lead-acid lantern, Quantity 2
Capacity	25 Ampere-hours
Alkaline Lantern Batteries
Lead-Acid Batteries	5 Ampere-hours
Setup and Data Retrieval	Serial connection to IBM PC or compatible computer with Teledyne Isco Flowlink
	for Windows Software Version 4.11 or above.
Baud Rate	19,200
Operating Temperature	0° to 140°F	-18° to 60°C
Storage Temperature	-40° to 140°F	-40° to 60°C

2-5