Windows 98SE
For New Windows 98SE Installation
1.Install the board and follow Microsoft procedures to install Windows 98SE accordingly.
2.Once Windows has been installed, right click My Computer and click Properties. Select Device Manager tab.
3.Double click PCI Mass Storage Controller listed under Other Devices.
4.Select Driver tab, then click Update Driver button.
5.Insert the driver diskette and click Next.
6.Select Search for a better driver ... and click Next.
7.Check Floppy disk drives, uncheck the other boxes, then click Next. Click Next again, then Finish.
8.Remove the driver diskette and restart Windows to complete driver installation.
For Existing Windows 98SE Installation
1.Install the board and boot up Windows 98SE.
2.At the Add New Hardware Wizard, click Next.
3.Select Search for the best driver for your device and click Next.
4.Insert the driver diskette, check Floppy disk drives, uncheck the other boxes, then click Next.
5.Click Next, then Finish.
6.Remove the driver diskette and restart Windows to complete driver installation.
5