Ultra Products 93900, 96900, 96500, 95900 For New Windows XP/Server 2003 Installation

Page 9

Windows XP/Server 2003

1.Install the board and follow Microsoft procedures to install Windows XP accordingly.

2.Restart your system when prompted during Windows' installation.

3.At the Windows Setup screen, press F6 to install the driver.

4.Insert the driver diskette. Press S then press Enter.

5.Select Silicon Image SiI 0680 ATA/133 Controller and press Enter.

6.Press Enter to continue and follow on-screen instructions to complete Windows XP installation.

7.When the Software Installation warning pops up, click Yes. And when the Hardware Installation warning pops up, click Yes again.

1.Install the board and boot up Windows XP.

2.At the Found New Hardware Wizard, insert the driver diskette, select Install the software automatically (Recommended), then click Next.

3.Click Finish, remove the driver diskette and restart Windows to complete the installation.

Image 9

Contents Features and Benefits Introducing the UltraATA 133 PCISystem Requirements Hardware Installation Package ContentsLayout Device Connection Connecting the cable Driver InstallationFor Existing Windows 98SE Installation For New Windows 98SE InstallationWindows 98SE Select Search for a better driver ... and click NextFor New Windows ME Installation To Verify Windows 98SE/ME InstallationFor Existing Windows ME Installation Windows MEFor New Windows NT 4.0 Installation For Existing Windows NT 4.0 InstallationWindows NT For New Windows 2000 Installation To Verify Windows NT 4.0 InstallationFor Existing Windows 2000 Installation WindowsFor New Windows XP/Server 2003 Installation For Existing Windows XP/Server 2003 InstallationWindows XP/Server Bios Configuration To Verify Windows 2000/XP/2003 InstallationSelect Device Manager SIIG, Inc Stewart Avenue Fremont, CA 94538 RMA # Technical Support and WarrantyAbout SIIG, Inc