4.The Ultra ATA ribbon cable has two connectors. If you install only one drive, connect it to the end connector of the cable. On the other hand, if you install two drives, connect the master drive to the end connector of the cable and the slave drive in the middle connector.
Figure 2. Connecting the cable
5.Reconnect the system power and other peripherals to your computer.
Driver Installation
This section provides information on how to install the UltraATA 133 PCI drivers for the following operating systems:
Windows 98SE | page 5 |
Windows ME | page 6 |
Verify Windows 98SE/ME Installation | page |
Windows NT 4.0 | page 7 |
Verify Windows NT 4.0 Installation | page 8 |
Windows 2000 | page 8 |
Windows XP/Server 2003 | page 9 |
Verify Windows 2000/XP/2003 Installation | page 10 |
Bios Configuration | page 10 |
4