Windows ME
For New Windows ME Installation
1.Install the board and follow Microsoft procedures to install Windows ME accordingly.
2.Once Windows has been installed, right click My Computer, then click Properties. Select Device Manager tab.
3.Double click PCI Mass Storage Controller listed under Other Devices.
4.Select Driver tab, then click Update Driver button.
5.Insert the driver diskette, select Automatic search for a better driver (Recommended), then click Next.
6.Click Finish, remove the driver diskette and click Yes to restart Windows to complete driver installation.
For Existing Windows ME Installation
1.Install the board and boot up Windows ME.
2.At the Add New Hardware Wizard, insert the driver diskette.
3.Select Automatic search for a better driver (Recommended), then click Next.
4.Click Finish.
5.Remove the driver diskette and restart Windows to complete driver installation.
To Verify Windows 98SE/ME Installation
1.
2.Double click SCSI Controllers, an entry, Silicon ImageSiI0680ATA/133Controllershould be listed.
6