VBrick Systems v4.1 manual Select a Start Mode, Login

TTo login to the IP Receiver:

1.Type the IP address of the IPR in a browser, for example http://<IPR_IPAddress>

2.Enter the Username and Password and click Login. This displays the Administrator Page. Use this page to access all system configuration parameters.

Figure 5. Login Page

User name	Case-sensitive username. Default = admin (all privileges) or public
	(read-only).
Password	Case-sensitive password. Default = admin (all privileges) or public
	(read-only).

Note If you have problems logging in because of a misconfigured IPR or lost IP address, you can still launch IWS by pressing Ctrl-Alt-F1from a USB keyboard directly attached to the IPR. See Logging In on page 10 for more information.

4. Select a Start Mode

The next step is to choose a Start mode from among the options explained below. The Start mode determines how the IPR will behave in your network environment when it's powered on. A network administrator will generally determine the Start mode based on the functional requirements at your site. Note that if you are using a TV monitor to configure IWS, as soon as you select a Start mode and press Apply, IWS closes and the TV switches to the selected mode.

TTo set the Start mode:

1.After logging in as explained above, the General Configuration page (Figure 6) opens.

2.Select a Start Mode from among the three choices listed below. See General Configuration on page 11 for more information about these options.

6 © 2007 VBrick Systems, Inc.