VBrick Systems v4.1 manual Hardware Specifications, Functional Specifications

The WM IP Receiver is a state-of-the-art decoder for WM streams originating from a VBrick WM appliance or a Windows Media streaming server, or for streams hosted by a VBrick EtherneTV Portal Server.

Figure 2. WM IPR – Top View

Hardware Specifications

Model	WM IPR
Processor	Intel® Pentium-M ® Processor 1.4 GHz
Chipset	Intel 854 chipset with 3D graphics
Memory	Standard: On Board DDR333 128 MB
Mass Storage	64 MB DOM
Input Device	IR Remote Control
Front Panel	Button: Power On/Off Indicators: Stand-By, Connected, Recording
Rear Panel	• 10/100 Ethernet port
	• One RCA jack for composite video output
	• Two RCA jacks for stereo audio output (right/left)
	• S-Video output connector
	• Coaxial and Optical S/PDIF out (not used)
	• Two USB 2.0 connectors
	• VGA
Weight	Less than 4.3 kg (9.4 lbs)
Dimension	308 (L) x 223 (D) x 60 (H) mm
Power	AC 100~240V/47-63 Hz, 80W
Operating System	Windows CE 5.0
Functional Specifications
Resolutions	Composite/S-Video: NTSC (720x480), PAL (720x576)
	VGA: 800x600, 1024x768, 1280x720, 1920x1080.
Protocols	Multicast, HTTP, MMS
Video Sources	VBrick WM Appliance, Windows Media Server.

2 © 2007 VBrick Systems, Inc.