Local Mode Configuration, Configuring Streams

Chapter 4

Local Mode Configuration

Topics in this chapter

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Configuring Streams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Customizing the Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Overview

When the Start mode is configured for Local on the General Configuration page, the IPR will display a list of all streams that are currently configured on this page. In Local mode, the IPR user interface is either a pre-configured "default" page or a customized page that you have designed and FTPed to the IPR web server. The user interface consists of multiple files that reside at the root level of the web server. Figure 7 below shows the default Local page after it has been configured to include stream information.

Figure 7. Default Interface in Local Mode

Configuring Streams

Use the following steps to add streams to the Local interface page. Note that changes to the Local-Mode URLs are not saved until you press Apply. If you accidentally delete stream, and did not press Apply, you can simply log out and log back in to recover.

TTo add streams to the Local interface:

1.Go to the General Configuration page in IWS.

VBrick WM IP Receiver Admin Guide