VBrick Systems v4.1 manual Mpeg IPRs only. This option is not available for WM IPRs

	Software Upgrade
Upgrade using	(MPEG IPRs only. This option is not available for WM IPRs.)
Configuration file	Upgrade using a text file that identifies the IP address and the
	password used to login to the IP Receiver. This radio button
	activates the Configuration File Path field and you can Browse
	to a configuration file if available. A sample pipe-delimited
	configuration file is shown here:
	172.22.133.1admin
	172.22.133.2admin
	172.22.133.3admin
Upgrade individual	Upgrade a single unit. Select the
unit	radio button and click Start
	Upgrade. A popup will prompt
	for IP Address, Username, and
	Password, and automatically run
	the upgrade.

Configuration File Path	MPEG IPRs only. Path to a pipe-delimited configuration file.
Select All	Selects all IPRs in the list box.
Clear All	Deselects all IPRs in the list box.
Start Upgrade	Starts an upgrade after you selects units to upgrade.

The following table shows the SAP information displayed in the list box for each IP Receiver

when you select Upgrade using Management SAPs.

Table 2. SAP Information

IP Address	IP Receiver IP address.
Hostname	The VBrick hostname set in the Configuration: Ethernet >
	Management page.
Group	The group name the IPR is associated with on the Configuration:
	Network > Management page.
Unit	The Unit Number of the IPR on the Configuration: Network >
	Management page.
Model Number	IP Receiver hardware model number.
Revision	IP Receiver software revision level.
Status	Upgrade status, for example, not started, in progress, failed,
	unable to connect, etc.

Once an upgrade starts, do not close the application until the status of all initiated upgrades

changes to Upgrade not needed, Upgrade successful or Upgrade failed. If you close the

application too soon, the status of some units may not display correctly when the application restarts. These units may include those which had errors during the upgrade process. The

VBrick WM IP Receiver Admin Guide 31