Clarion CZ309 CD Player Manual - Operations and Settings Guide

Operations Common to Each Mode

English

To change adjustment setting

1.Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [x] or [v] button to select the “item name”.

“CLOCK” ↔ “SETTINGS” ↔ “SCRN SVR”

↔“MSG INP” ↔ “SCROLL” ↔ “DIMMER”

↔“A-CANCEL” ↔ “TEL-SP” ↔ “TEL- SW” ↔ “S-CHECK”

3.Press the [w] or [z] button to select the “desired setting value”.

∗ In the case of display blinking “ENT”, you can press the [ ] button to adjust the

setting value.

∗ After completing settings, press the [DISP] button to return to the previous mode.

●Turning the screen saver function on

or off

This unit is provided with the screen saver

function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on or off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [w] or [z] button to select the setting.

Each time you press the [w] or [z] button, the setting changes in the following order:

“MESSAGE” ↔ “ON” ↔ “OFF”

●Setting the clock

2-1. Select “CLOCK”.

3-1. Press the [ ] button

3-2. Press the [x] or [v] button to select the hour or the minute.

3-3. Press the [w] or [z] button to set the correct time.

∗The clock is displayed in 12-hour format.

3-4. Press the [ ] button to store the time into memory.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

●Displaying the settings

The number of indicator of this unit decreases, you can see the state of current settings at any operation mode.

2-1. Select “SETTINGS”.

3-1. Press the [w] or [z] button to display the state of current settings.

∗When the setting is selected, after 1 second the current state will be displayed.

For example:

after 1 second,

●Entering message information

Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting.

∗The factory default setting is “WELCOME TO CLARION”.

2-1. Select “MSG INP”.

3-1. Press the [ ] button.

3-2. Press and hold the [BND] button for 1 second or longer to clear the old message.

3-3. Press the [x] or [v] button to move the cursor.

3-4. Press the [BND] button to select a character type. Each time you press the [BND] button, the character type changes in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜ Capital letters…

3-5. Press the [w] or [z] button to select the desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30 characters for message.

3-7. Press and hold the [ ] button for 2 seconds or longer to store the message in memory.

∗Press and hold the [BND] button for 1 second or longer to cancel the input message. Then press and hold the [ ] button for 2 seconds or longer to store the message and the message return to default setting.

16 CZ309