Satellite Radio Operations

This function is available when a Satellite Radio Receiver is connected through the CeNET cable.

This unit can control the following satellite radio receivers:

•XM Satellite Interface Adapter (Mini-Tuner Included) : CNP2000UC

Clarion cable for CNP2000UC : CNPCLA1

•SIRIUS Satellite Radio Receiver : SIRCL3

•SIRIUS Satellite Translator Adapter : CLA-SC1 (which needs Sirius universal Tuner sold separately.)

Notes:

•When the function is differ depending to the connected receiver, they are distinguished by the following notations:

“XM”: for an XM Satellite Radio Receiver

“SIRIUS”: for a SIRIUS Satellite Radio Receiver

•XM and the XM logos are trademarks of XM Satellite Radio Inc.

1.Press and hold the [DISP] button for 1 second or longer to display the ADJUST item.

2.Press the [x] or [v] button to select “SID DISP”.

3.Press the [ ] button, the display will display the upper 6 digits.

4.Press the [w] or [z] button to switch

between the display for the upper 6 digits and lower 6 digits.

5.To return to the previous mode, press the [DISP] button.

1.Press the [DISP] button to select the desired channel label.

Channel ➜ Category ➜ Title (Artist) ➜ Radio text ➜ Channel...

English

Selecting a Satellite Radio mode

1.Press the [SRC] button.

The system changes to the specified Satellite Radio mode.

1.Press the [BND] button to select a band. This changes the reception band as follows:

•XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...

•SIRIUS: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...

●Information displayed during reception The following information is displayed when the satellite radio cannot be received normally.

•When the receiver is turned on the first time or after a reset: “UPDATING”

•When a channel is being tuned in (no signal is yet received):

XM: “LOADING”, SIRIUS: “LINKING”

•A channel without a broadcast has been selected:

XM: “– – – CH”, SIRIUS: “INVALID CH”

•A channel not covered by your contract: XM: “UPDATING”, SIRIUS: “CALL 888” ↔ “539-SIRI” (alternated)

∗For details, see the following operation descriptions.

Note:

•The audio output is muted and other button operations are not accepted during channel selection.

There are two channel selection modes: quick tuning mode and step tuning mode.

●Quick tuning

1.Press and hold the [x] or [v] button for 1 second or longer.

●Step tuning

1. Press the [x] or [v] button.

CZ309 23