Tyco 1540 manual Pulsed Output, Pulse Duration

Press to return to the Reset screen.

Press >> to reset the selected reading(s). The next screen will appear.

Confirmation

3.10 Pulsed Output, Pulse Duration

0240

0340

0440

0640

1000

1540

Option

This applies to the Relay Pulsed Output option only. Units with this option provide pulses to indicate power consumption (kWh). See Section 1.6 pulse output option.

This screen allows the user to set the duration of the relay output pulse. The value displayed represents the pulse duration in milliseconds (ms). On a two part DIS 1540/Integra 1560, this screen will set the pulse duration for the Kvarh pulse relay (where fitted) also.

To retain the current setting, press >>. The next Set-up screen will appear.

To change the pulse duration, press .

Use the key to scroll through the available values of 60, 100 and 200.

Select the value required and press >> to confirm your selection. The confirmation screen will appear.

Edit

To change the value again, press . The Edit screen will reappear.

To accept the displayed pulse duration, press >>. The next screen will appear. Depending on the model, this may take you out of the Set-up screens and back to the last selected Display screen.

Confirmation

Integra 1540, 1000, 0640, 0440, 0340, 0240 Issue 1 04/03 29