3.11 Pulse Rate
0240
0340
0440
0640
1000
1540
Option
This applies to the Relay Pulsed Output option only. Units with this option provide pulses to indicate power consumption (kWh).
This screen allows setting of the kWh pulse rate divisor. On a two part DIS 1540/Integra 1560, this screen will set the pulse rate for the kvarh pulse relay (where fitted) also. By default, the unit produces one pulse per kWh. Changing this divisor changes the output pulse rate, as follows:
Divisor | One pulse per: |
1 | 1 kWh |
10 | 10 kWh |
100 | 100 kWh |
1000 | 1000 kWh (DIS1540 with 1560/1580 only) |
Press >> to accept the currently displayed value. The next
To change the pulse rate divisor, press .
Use the key to scroll the value through the available values 1, 10, 100, 1,000. If the maximum power is greater than 3.6 megawatts, the range of divisors will be restricted to force an upper limit to the number of pulses/hour of 3600.
Select the required divisor and press >> to confirm your selection. The Confirmation screen will appear.
Edit | To change the value again, press . The Edit screen will |
| reappear. |
To accept the displayed value, press >>. The next
Confirmation