Classe Audio CDP-102 owner manual Unpacking and Placement, Remove all accessories from the carton

Unpacking and Placement

unpacking your player Carefully unpack your disc player according to the supplied instructions, and

	remove all accessories from the carton.
Important!	Keep all packing materials for future transport of your Classé
	product. Shipping your new component in anything other

than its purpose-designed packing material may result in damage that is not covered by the warranty.

placement This disc player has been designed to operate optimally on any stable and level surface. Vibration damping in the feet and drive assemblies of the units provide a high level of isolation from external disturbances.

As with any digital component, it is best to place the disc player somewhat apart from your most sensitive analog electronics, particularly turntables and preampli–ers. Generally, placing it on its own shelf should suf–ce.

Note that adequate clearance for the AC cord and connecting cables must be left behind the disc player. We suggest leaving eight inches (20 cm) of free space behind the disc player to allow all cables suf–cient room to bend without crimping or undue strain.

Classé recommends that the unit not be placed directly on the top surface of a power ampli–er (or any other heat source).

ventilation Your Classé disc player generates a certain amount of heat in the course of normal operation. Be sure to allow three inches of clearance above it and three inches to each side to allow heat dissipation through air circulation. Avoid placement on soft surfaces that would restrict air—ow (such as plush carpeting).

custom installations Drawings are included in this manual to facilitate special installations and custom cabinetry (see the section Dimensions). An optional, purpose-designed rack mount kit is available for this product. Contact your Classé dealer for more information.

ENGLISH

7