Installing Host Cards and Cable Accessories
This section describes the mechanical installation of the SPEED LE and SPEED LE Express host cards and associated connector boxes and cables for 1,2, 4, and 8 ports and includes the following;
•Installing SPEED LE and SPEED LE Express Cards on page 27
•Installing Cables and Connector Boxes on page 28
Installing SPEED LE and SPEED LE Express Cards
This section describes the mechanical installation of SPEED LE and SPEED LE Express cards.
To install a SPEED LE or SPEED LE Express host card proceed as follows;
Note
The exact location of host card slots varies for different systems, for exact mechanical details of your system, refer to your system documentation.
Warning
Dangerous voltages exist inside computer systems. Before installing host cards in your system, turn off the power supply and unplug the power cord.
1.Turn off the power to your system and unplug the power cord.
2.Remove the system cover to expose the inside of the connector panel for host cards.
Chapter 2 Installing Drivers and Host Cards
Page 27