Perle Systems 1S1P manual Installing Drivers and Host Cards

Page 22

5.In the Device Manager window, click on the Multiport serial adapters icon to display the currently installed devices.

6.In the Device Manager window, double click on the device whose properties you want to view or change

The device Properties tabbed window is now displayed.

7.In the device Properties window, click on the Port Settings tab to display the Port Settings page.

8.In the Port Settings page, set the Port Number, Baud Rate, and any other configuration parameters you require.

DSR Always On—This feature is used for systems where the wiring does not support the DSR signal but the Host application still requires that the DSR be active. When the DSR Always On option is enabled, the driver will always report to the application that the DSR signal is "on".

Chapter 2 Installing Drivers and Host Cards

Page 22

Image 22

Contents Speed LE User GuidePage Page Purpose of this manual About this manualWho this manual is for Document navigation Using this on-line manualHypertext jumps Revision history Date Part number DescriptionFast Contents Contents Cabling Information Appendix B Contacting Perle Introduction You need to read this chapter if you want toAbout the Speed LE Serial Adaptor cards Connection Accessories Installing Drivers and Host Cards Before You Start Downloading Drivers From the Perle Website Select the MultiPort Serial Cards option Select Speed LEInstalling under Windows 2000/XP/Server 2003/Vista/ Server Installing Device Drivers and Utilities onto Your System Installing Drivers and Host Cards Click Start All Programs Perle Perle-Serial Update Driver or Adding Additional Cards and/or Updating DriversConfiguring Serial Ports Installing Drivers and Host Cards General Installation Procedure for Linux Installing under LinuxInstalling Drivers onto Your System Rpm -ivh perle-serial-version-release.src.rpm Cd /tmp/perle-serial-version-release Tarinstall.shTar -xzvf perle-serial-version-release.tgz Psaddports m n Creating Devices for the Attached PortsModprobe perle-serial Taruninstall.sh Setting the DSR SignalMake uninstall Rpm -e perle-serialInstalling Host Cards and Cable Accessories Installing Speed LE and Speed LE Express CardsInstalling Cables and Connector Boxes Installing Drivers and Host Cards Removing Host Cards Cabling Information Definitions of Signals and Direction EIA-232 Direction DescriptionDB9 Back Panel Connectors and Pinout DB9M pin EIA-232Host Card Back Panel Connectors and Pinouts RJ45 10-pin EIA-232 Speed LE RJ45 Back Panel Connectors and PinoutRJ45 8-pin Speed LE Express RJ45 Back Panel Connectors and Pinout RJ45 10-pin EIA-232 RJ45 8-pinDB25 Cent Pin Direction Signal Function Notes Name DB25 Femaie Parallel Port PinoutsVHDCI-68 Ultra Scsi Back Panel Connectors and Pinout Ultra Scsi EIA-232 Pin NumberTXD3 VHDCI-68 Ultra Scsi Pin EIA-232 Number RI5 DSR6 Connector Box and Cable Guide Connector Box and Cable Pinouts RJ45 10-pin to DB25 Converter RJ45 pin DB25 Pin EIA-232RJ45 10-pin to DB9 Converter RJ45 pin DB9 Pin EIA-232RJ45 Connector Box RJ45 10-pin RJ45 8-pin EIA-232DB25 Connector Box DB25 Pin EIA-232DB9 Connector Box DB9 Pin EIA-232DB25 Fan-Out Cable DB9 Fan-Out Cable Low Profile Bracket Conversion Speed LE 1P and 1S1P models onlyAppendix a Troubleshooting You need to read this appendix if you want toWindows 2000/XP/Server 2003/Vista/Server Windows Error Messages Problem Action requiredMaking a technical support query Appendix B Contacting PerleWho to contact Information needed when making a query Write details hereFeedback about this manual Repair procedureMaking a support query via the Perle web Perle support centres worldwide Country AddressIndex Numerics#A B C D E F G H I J K L M N O P Q R S T U V W X Y Z