Omron DR 170 14 manual BCD Format, Long Format Signed/BCD, Floating Point Format IEEE/BCD

Page 38

Klinkmann Automation Omron Ethernet DAServer

36

contains 8000 hex. In this case item name DM100 or DM100U would be displayed in client as 32768. Signed quantities may be read from the same channel by appending the suffix 'S' (or 's') to the item name. So, item name DM100S would be displayed in client as -32768.

BCD Format

To read/write data using BCD format - append the suffix ‘B’ (or ‘b’) to the item name, e.g. DM100B.

Long Format (Signed/BCD)

Two consecutive 16-bit words in a PLC can be interpreted as a 32-bit long integer. It can be formatted as either signed (-2,147,483,648 to 2,147,483,648) or BCD (0 to 99,999,999). To read/write an item in signed long format - append the letter 'L' (or 'l') to the item name. To read/write an item in BCD long format - append the letter 'M' (or 'm') to the item name. For example, if DM100 contains 0234 hex and DM101 contains 1356 hex, DM100L returns 324,403,764 and DM100M returns 13,560,234.

Note: Long format is not supported if Multiple Memory Area Read FINS commands are used.

Floating Point Format (IEEE/BCD)

Two consecutive 16-bit words in a PLC can be interpreted as a single precision floating point number. It is formatted as either IEEE (-3.402823 * 1038 to 3.402823

*1038) or BCD (0.0000001 * 10-7to 0.9999999 * 10+7). To read/write an item in IEEE floating point format, append one of the following letters to the item name: 'F' or 'f’. To read/write an item in BCD floating point format - append the letter 'G' (or 'g') to the item name. For example, if D100 contains 9620 hex and D101 contains 2436 hex in a CV500 PLC, D100F returns 3.959212 * 10-17 and D100G returns 0.4369620 * 102.

Floating point format is relevant only with items, indicating memory areas word contents.

Note: IEEE format is NOT supported in the C-Series PLC family

Note: Floating point format is not supported if Multiple Memory Area Read FINS commands are used.

ASCII Strings Format

Multiple consecutive 16-bit words (block size of 1 to 29) in a PLC can be interpreted as a string of ASCII characters. The ASCII string is stored/retrieved from the lowest-numbered address to the highest and from the high-order byte to the low-order byte with each address. To define a range of words, use '-' (minus sign) between the two address locations. For example, DM10-DM12 indicates locations from DM10 to DM12. ASCII string characters can be specified to come from the high-order byte, low-order byte, or both bytes of the words:

Low-order Byte

Only the low-order byte (LSB - least significant 8-bits) of each

 

word is used for read. To use this format, append the suffix 'E'

 

to the item name.

Omron Ethernet DAServer Ver 1.x User Manual Rev 1.4

17014m14

Image 38
Contents Omron Ethernet Direct DAServer User’s Guide Ver 1.x Rev DR 170Contents Index ContentsAbout This User Guide Introduction OverviewSuiteLink Communication ProtocolsApplication Communications Protocols FastDDE Accessing Items via the DAServerFins Message Communication NetDDEDDE/SuiteLink Features Demo ModeKlinkmann Automation Omron Ethernet DAServer Before starting the Omron Ethernet DAServer Ethernet Unit Configuration Example for CS1 PLC Klinkmann Automation Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer Comments on example program ladder diagram Example program for sending unsolicited data from PLCKlinkmann Automation Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer Getting Started Quickly with the DAServer To prepare the Omron Ethernet DAServerAdd Controller Object Configuring the DAServerNewSOCKET000 by default To prepare the Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer To create Socket objects from the Configuration branch DASOmronEth Hierarchy in the DAServer ManagerTo add Controller to your Omron Ethernet hierarchy Host Name IP AddrPort Number Klinkmann Automation Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer Enabling Software License Key for DASOmronEth Configuring Device Group Definitions Device Group DefinitionsTo create or add device groups To make edits on device groupsKlinkmann Automation Omron Ethernet DAServer Scan-Based Message Handling To configure default update intervalsTo delete device groups To archive configuration sets Configuring Device Item DefinitionsArchiving Configuration Sets To use different configuration sets from the current oneTo create or add device items Device Item DefinitionsName Item Reference To add item referencesHot Configuration Klinkmann Automation Omron Ethernet DAServer Pnb or Pnbb or Pn.b or Pn.bb Item Name General FormatPnS Pn-PhSFloating Point Format IEEE/BCD BCD FormatLong Format Signed/BCD Ascii Strings FormatImortant Note ReadWrite = a CS1/CJ1 PLCs= a To M Klinkmann Automation Omron Ethernet DAServer C200HX/C200HG/C200HE PLCs CV-series PLCs PVS Flag or Bit Status Step StatusCPM2x PLCs Klinkmann Automation Omron Ethernet DAServer CQM1 PLCs DAServer Standard System Items DAServer Device-Specific System Items System Item Type Description Values Name Access RightsDAServer Global System Item System Item Type Description ValuesKlinkmann Automation Omron Ethernet DAServer DAServer Device-Group-Specific System Items RangeRange Generic OPC Syntax AREA10.VESSEL1.TIC1.PLC.D100=DASOmronEthPLC!$SYS$Status YourOPCAccessPath.$SYS$StatusMonitoring Connectivity Status with the PLC Reading Values from the DAServer into Excel Using DDEStatus and IOStatus in ExcelMonitoring the Status of DAS Conversations =POKEchannel,itemname, DataReference Writing Values to the DAServer from ExcelChannel=INITIATEapplicationname,topicname =TERMINATEchannelError Message Explanation Probable Cause Solution Log Flag Error Messages and CodesDAServer Error Messages Item Names Creating write Invalid value poked Check Item’s DASProtFail Data, received Take into DASProtWarn Fins Response Codes Server-Specific Error CodesError code Logger Message Log Flag Main Code Sub Probable Cause Remedy Log Flag HexKlinkmann Automation Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer Klinkmann Automation Omron Ethernet DAServer DAServer Architecture DAServersPLC Protocol Layer Plug-insDAS Engine Component Environments Klinkmann Automation
Related manuals
Manual 67 pages 16.17 Kb

DR 170 14 specifications

The Omron DR 170 14 is a leading-edge digital infrared thermometer that has established a strong reputation for its accuracy and efficiency in measuring body temperature. This advanced device is particularly noted for its user-friendly design, making it suitable for both medical professionals and home use.

One of the key features of the Omron DR 170 14 is its non-contact measurement capability, allowing users to obtain temperature readings from a distance of about 1-3 centimeters. This feature is crucial in minimizing the risk of cross-contamination, especially in healthcare settings. The thermometer utilizes infrared technology to detect the infrared energy emitted by the body, ensuring quick and reliable readings in just seconds.

The Omron DR 170 14 also boasts a large, easy-to-read LCD display that provides clear visibility of temperature readings. This display is backlit, allowing for usage in low-light conditions, making it convenient during nighttime monitoring of children's temperatures.

Furthermore, the device includes a memory function that can store multiple temperature readings, assisting users in tracking fever patterns over time. This feature is invaluable for caregivers and healthcare providers as it allows for better assessment and decision-making regarding treatment plans.

In terms of accuracy, the Omron DR 170 14 is equipped with advanced measurement algorithms that enhance precision in readings, positioning it as a reliable option for temperature measurement. The thermometer can measure not only body temperature but also surface temperatures of objects and liquids, providing versatility beyond just clinical settings.

Another notable characteristic is its compact and lightweight design, which makes it highly portable and easy to carry around, whether in a medical bag or a home setting. The thermometer is also powered by batteries, ensuring that it remains operational even in case of power outages.

Overall, the Omron DR 170 14 stands out for its combination of modern technology, ease of use, and reliable performance. With its non-contact functionality, rapid readings, and memory features, it serves as an essential tool for anyone needing accurate temperature assessments, whether in a clinical or home environment. The thermometer exemplifies Omron's commitment to creating healthcare solutions that are not only innovative but also accessible to a wide range of users.