Nlynx Wireless Gateway manual DNS IP Addresses

Page 15

The Global WAN Mode controls must be adjusted as required by your ISP. The settings you enter here determine how the Wireless Gateway will be identified to your ISP's equipment and other machines on the global Internet.

∙If your ISP has given you a fixed IP address to use on the WAN link, click the Specify Global IP Address control. Then click in (or tab to) the three boxes below it and type in the global IP address, subnet mask, and default gateway that the ISP has instructed you to use.

∙If your ISP will assign the Wireless Gateway an IP address and related settings using DHCP (the Dynamic Host Configuration Protocol), simply click Obtain Global IP Address Automatically (DHCP). DHCP is commonly used on cable links.

∙If your ISP uses PPPoE (the Point-to-Point Protocol over Ethernet), click the PPP over Ethernet (PPPoE) control. The ISP will have given you a “username” or user ID and a password to use on the PPPoE link; click in (or tab to) the corresponding boxes under this control and type in the strings your ISP has instructed you to use. In some cases — especially if the Wireless Gateway's WAN port is networked directly to more than one broadband modem or router — you will need to type an identifying string into the Service Name box.

Your PPPoE link might allow you to save on connection charges by disconnecting when the link is not in use and reconnecting when someone on the LAN wants to access the Internet. If this is the case, you have the option of setting the Connect on Demand control to Yes or No. If you click No , you will have to use the PPPoE Connect and PPPoE Disconnect commands in the Tools menu to take the Wireless Gateway on line and off line. (You can, alternatively, use the Manager Server software to set a connection schedule; see the Manager Se rver manual for details.) If you click Yes, be sure to set the Maximum Idle Time control also. The Wireless Gateway will then automatically disconnect whenever the specified amount of time passes without anyone on the LAN accessing the Internet.

DNS IP Addresses

In almost all cases your ISP will provide you with the IP addresses of two or more DNS (Domain Name System) servers. Click in the boxes provided and type in the addresses carefully. If you set the Wireless Gateway up as a DHCP

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Wireless Gateway Users Guide CE Mark Warning FCC WarningTable of Contents Appendix Introduction FeaturesPage Back Panel External ComponentsFront Panel LPT LED FaultyWeb Configuration Page Basic Setup Basic Setup Broadband Router Router NameLocal LAN Global WAN Mode DNS IP Addresses WAN Port MAC Save/CancelWireless Channel Basic Setup Wireless APTx Bit Rate Basic Setup Print Server Print PortAppleTalk Save/Cancel Basic Setup Admin Password Advanced Settings Advanced Settings Dhcp Server Address Range EnableReserve Table Lease TimeSave/Cancel Advanced Settings Port Forwarding TCP Port to IP Forwarding DMZ Host Advanced Settings Port Open Go toApplication Define Port Open List Page Static Routing Advanced Settings RoutingDynamic Routing NAT/Router Mode Page Advanced Settings Filters Protocols Filter Users FilterBlock WAN Request NetBIOS over TCP/IP FilterPage Advanced Settings Manager Console Log and Filter Manager ConsoleSchedule Connection Save/Cancel Define User List Advanced Settings Wireless AccessAccess Control Enable/Disable Advanced Settings Wireless EncryptionEncrypt Data Transmissions Using Input FormatKey 1 through Key Save/Cancel Advanced Settings Wireless Bridge Broadcast/Multicast Filter Protocol FiltersPage Save/Cancel ∙ Dhcp InformationInformation Device Information Dhcp Information Routing Information Users Information Connections Information WAN Link Information Printer Status Information Wireless Stations Information Wireless Tallies Page Tools Tools ResetTools Factory Reset Tools Print TestTools PPPoE Connect and PPPoE Disconnect Page Help Device Utility InstallationUsing Device Utility Changing IP Address Firmware UpgradeSpecifications

Wireless Gateway specifications

The Nlynx Wireless Gateway stands out as a cutting-edge solution designed to meet the ever-growing demands of modern connectivity. Aimed primarily at businesses and industrial applications, this device combines robust technology with user-friendly features, positioning itself as a reliable hub in various environments.

One of the main features of the Nlynx Wireless Gateway is its dual-band wireless capability. It supports both 2.4 GHz and 5 GHz frequency bands, enabling devices to connect to the most suitable frequency for optimal performance. This dual-band support is critical in reducing congestion and enhancing data throughput, ensuring that crucial operations run smoothly without interruptions.

In terms of connectivity, the Nlynx Wireless Gateway supports multiple network protocols, including Wi-Fi, Ethernet, and cellular connectivity. This versatility allows it to seamlessly integrate into a variety of existing infrastructure, whether it's connecting legacy devices via Ethernet or providing wireless access in areas where cabling is impractical. The gateway also supports advanced MIMO (Multiple Input Multiple Output) technology, which significantly increases the range and reliability of wireless signals by utilizing multiple antennas for transmitting and receiving data.

Security is a top priority for the Nlynx Wireless Gateway. It incorporates advanced encryption protocols such as WPA3, ensuring that data transmitted over the network remains secure from unauthorized access. Additionally, it features built-in firewall capabilities and supports VPN connections, providing an extra layer of protection for sensitive information.

The management of the Nlynx Wireless Gateway is made effortless through its intuitive web-based interface. Users can easily monitor network performance, manage connected devices, and configure settings without needing extensive technical knowledge. Furthermore, it supports firmware updates over-the-air, ensuring that users always have the latest security patches and features.

Power over Ethernet (PoE) support is another characteristic that enhances the flexibility of the Nlynx Wireless Gateway. By allowing the device to receive power through the Ethernet cable, installation becomes simpler and more streamlined, particularly in challenging locations where power outlets are limited.

Overall, the Nlynx Wireless Gateway is a feature-rich device that encompasses advanced networking technologies, exceptional security measures, and user-friendly management tools, making it an ideal choice for businesses looking to enhance their connectivity solutions while ensuring a robust and reliable network infrastructure.
Top Page Image Contents