Nlynx Wireless Gateway manual Advanced Settings Wireless Encryption, Enable/Disable

Page 47

Advanced Settings — Wireless Encryption

Wireless network communications are easily intercepted. WEP (Wired Equivalent Privacy) is an encryption method specified by the IEEE 802.11b standard to make any intercepted commun ications extremely difficult to interpret by unauthorized parties. The Wireless Gateway supports WEP with up to four “keys,” as specified in the standard. Each key can be of the 64-bit type or the 128-bit type.

When WEP encryption is enabled on the Wireless Gateway, wireless access will be granted only to stations that also use WEP encryption with the same key as the Wireless Gateway.

The recommended way to use WEP is as follows: (1) Decide on an input format and create four keys (key creation is explained below). (2) Select the key to be used (this must be done on the Wireless Gateway and all wireless stations communicating through it). (3) Enable WEP encryption.

The controls in the Wireless Encryption panel are explained below.

Enable/Disable

The Enable /Disable control turns WEP encryption on and off on the Wireless Gateway. Click the desired setting. Any change in the setting takes effect when the settings in the Wireless Encryption panel are saved. For other

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Wireless Gateway Users Guide CE Mark Warning FCC WarningTable of Contents Appendix Introduction FeaturesPage Back Panel External ComponentsFront Panel LPT LED FaultyWeb Configuration Page Basic Setup Local LAN Basic Setup Broadband RouterRouter Name Global WAN Mode DNS IP Addresses WAN Port MAC Save/CancelWireless Channel Basic Setup Wireless APTx Bit Rate AppleTalk Basic Setup Print ServerPrint Port Save/Cancel Basic Setup Admin Password Advanced Settings Advanced Settings Dhcp Server Address Range EnableReserve Table Lease TimeSave/Cancel Advanced Settings Port Forwarding TCP Port to IP Forwarding DMZ Host Application Advanced Settings Port OpenGo to Define Port Open List Page Static Routing Advanced Settings RoutingDynamic Routing NAT/Router Mode Page Advanced Settings Filters Protocols Filter Users FilterBlock WAN Request NetBIOS over TCP/IP FilterPage Advanced Settings Manager Console Log and Filter Manager ConsoleSchedule Connection Save/Cancel Define User List Advanced Settings Wireless AccessAccess Control Enable/Disable Advanced Settings Wireless EncryptionKey 1 through Key Encrypt Data Transmissions UsingInput Format Save/Cancel Advanced Settings Wireless Bridge Broadcast/Multicast Filter Protocol FiltersPage Save/Cancel ∙ Dhcp InformationInformation Device Information Dhcp Information Routing Information Users Information Connections Information WAN Link Information Printer Status Information Wireless Stations Information Wireless Tallies Page Tools Tools ResetTools PPPoE Connect and PPPoE Disconnect Tools Factory ResetTools Print Test Page Help Device Utility InstallationUsing Device Utility Changing IP Address Firmware UpgradeSpecifications

Wireless Gateway specifications

The Nlynx Wireless Gateway stands out as a cutting-edge solution designed to meet the ever-growing demands of modern connectivity. Aimed primarily at businesses and industrial applications, this device combines robust technology with user-friendly features, positioning itself as a reliable hub in various environments.

One of the main features of the Nlynx Wireless Gateway is its dual-band wireless capability. It supports both 2.4 GHz and 5 GHz frequency bands, enabling devices to connect to the most suitable frequency for optimal performance. This dual-band support is critical in reducing congestion and enhancing data throughput, ensuring that crucial operations run smoothly without interruptions.

In terms of connectivity, the Nlynx Wireless Gateway supports multiple network protocols, including Wi-Fi, Ethernet, and cellular connectivity. This versatility allows it to seamlessly integrate into a variety of existing infrastructure, whether it's connecting legacy devices via Ethernet or providing wireless access in areas where cabling is impractical. The gateway also supports advanced MIMO (Multiple Input Multiple Output) technology, which significantly increases the range and reliability of wireless signals by utilizing multiple antennas for transmitting and receiving data.

Security is a top priority for the Nlynx Wireless Gateway. It incorporates advanced encryption protocols such as WPA3, ensuring that data transmitted over the network remains secure from unauthorized access. Additionally, it features built-in firewall capabilities and supports VPN connections, providing an extra layer of protection for sensitive information.

The management of the Nlynx Wireless Gateway is made effortless through its intuitive web-based interface. Users can easily monitor network performance, manage connected devices, and configure settings without needing extensive technical knowledge. Furthermore, it supports firmware updates over-the-air, ensuring that users always have the latest security patches and features.

Power over Ethernet (PoE) support is another characteristic that enhances the flexibility of the Nlynx Wireless Gateway. By allowing the device to receive power through the Ethernet cable, installation becomes simpler and more streamlined, particularly in challenging locations where power outlets are limited.

Overall, the Nlynx Wireless Gateway is a feature-rich device that encompasses advanced networking technologies, exceptional security measures, and user-friendly management tools, making it an ideal choice for businesses looking to enhance their connectivity solutions while ensuring a robust and reliable network infrastructure.
Top Page Image Contents