Nlynx Wireless Gateway manual Advanced Settings Wireless Access, Define User List

Page 45

Advanced Settings — Wireless Access

The Wireless Access panel lets you control which machines can, and which ones cannot, connect to the network through the Wireless Gateway's wireless access point.

Initially, no controls are placed on wireless access through the Wireless Gateway. To control access, you must create a “user list,” that is, a list of MAC (Media Access Control) addresses, each with an indication of whether the station with that address is allowed access or not. This list can then be enabled (that is, its restrictions put into effect) or disabled. Finally, you must indicate whether stations not on the list are allowed access or not.

The controls in the Wireless Access panel are explained below.

Define User List

The Define User List section of the Wireless Access panel contains controls for creating and maintaining a list of wireless stations that are explicitly allowed or denied wireless access to the network.

The MAC Address input box is for adding a station to the list. A station's MAC address can usually be found on a label attached to the station's case or its wireless interface card. It is a number in hexadecimal (base 16) notation, and may contain the letters A through F (in upper or lower case) as well as the digits 0 through 9. Spaces may be added for readability. An example of a

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Wireless Gateway Users Guide CE Mark Warning FCC WarningTable of Contents Appendix Introduction FeaturesPage Back Panel External ComponentsFront Panel LPT LED FaultyWeb Configuration Page Basic Setup Basic Setup Broadband Router Router NameLocal LAN Global WAN Mode DNS IP Addresses WAN Port MAC Save/CancelWireless Channel Basic Setup Wireless APTx Bit Rate Basic Setup Print Server Print PortAppleTalk Save/Cancel Basic Setup Admin Password Advanced Settings Advanced Settings Dhcp Server Address Range EnableReserve Table Lease TimeSave/Cancel Advanced Settings Port Forwarding TCP Port to IP Forwarding DMZ Host Advanced Settings Port Open Go toApplication Define Port Open List Page Static Routing Advanced Settings RoutingDynamic Routing NAT/Router Mode Page Advanced Settings Filters Protocols Filter Users FilterBlock WAN Request NetBIOS over TCP/IP FilterPage Advanced Settings Manager Console Log and Filter Manager ConsoleSchedule Connection Save/Cancel Define User List Advanced Settings Wireless AccessAccess Control Enable/Disable Advanced Settings Wireless EncryptionEncrypt Data Transmissions Using Input FormatKey 1 through Key Save/Cancel Advanced Settings Wireless Bridge Broadcast/Multicast Filter Protocol FiltersPage Save/Cancel ∙ Dhcp InformationInformation Device Information Dhcp Information Routing Information Users Information Connections Information WAN Link Information Printer Status Information Wireless Stations Information Wireless Tallies Page Tools Tools ResetTools Factory Reset Tools Print TestTools PPPoE Connect and PPPoE Disconnect Page Help Device Utility InstallationUsing Device Utility Changing IP Address Firmware UpgradeSpecifications

Wireless Gateway specifications

The Nlynx Wireless Gateway stands out as a cutting-edge solution designed to meet the ever-growing demands of modern connectivity. Aimed primarily at businesses and industrial applications, this device combines robust technology with user-friendly features, positioning itself as a reliable hub in various environments.

One of the main features of the Nlynx Wireless Gateway is its dual-band wireless capability. It supports both 2.4 GHz and 5 GHz frequency bands, enabling devices to connect to the most suitable frequency for optimal performance. This dual-band support is critical in reducing congestion and enhancing data throughput, ensuring that crucial operations run smoothly without interruptions.

In terms of connectivity, the Nlynx Wireless Gateway supports multiple network protocols, including Wi-Fi, Ethernet, and cellular connectivity. This versatility allows it to seamlessly integrate into a variety of existing infrastructure, whether it's connecting legacy devices via Ethernet or providing wireless access in areas where cabling is impractical. The gateway also supports advanced MIMO (Multiple Input Multiple Output) technology, which significantly increases the range and reliability of wireless signals by utilizing multiple antennas for transmitting and receiving data.

Security is a top priority for the Nlynx Wireless Gateway. It incorporates advanced encryption protocols such as WPA3, ensuring that data transmitted over the network remains secure from unauthorized access. Additionally, it features built-in firewall capabilities and supports VPN connections, providing an extra layer of protection for sensitive information.

The management of the Nlynx Wireless Gateway is made effortless through its intuitive web-based interface. Users can easily monitor network performance, manage connected devices, and configure settings without needing extensive technical knowledge. Furthermore, it supports firmware updates over-the-air, ensuring that users always have the latest security patches and features.

Power over Ethernet (PoE) support is another characteristic that enhances the flexibility of the Nlynx Wireless Gateway. By allowing the device to receive power through the Ethernet cable, installation becomes simpler and more streamlined, particularly in challenging locations where power outlets are limited.

Overall, the Nlynx Wireless Gateway is a feature-rich device that encompasses advanced networking technologies, exceptional security measures, and user-friendly management tools, making it an ideal choice for businesses looking to enhance their connectivity solutions while ensuring a robust and reliable network infrastructure.
Top Page Image Contents