Nlynx Wireless Gateway manual External Components, Back Panel

Page 7

2

External Components

This section describes the back and front panels of the Wireless Gateway in details.

Back Panel

Following are explanations of the items on the Wireless Gateway's back panel:

∙Antennae: The antennae at the back panel carry radio-frequency signals between wireless stations and the Wireless Gateway's wireless bridge (the interface between the wireless and wired parts of the LAN).

∙Reset button: Reset will be initiated when the reset button is pressed once and the LPT LED begins to flash. Factory Reset will be initiated when the reset button is pressed continuously for three seconds or when the LPT LED begins to light up. Release the reset button and the LPT LED will begin to flash indicating the Wireless Gateway is changing to factory reset. When factory reset is completed the Wireless Gateway will be set to default on channel 11 with default IP address as 192.168.0.254 and EES-ID is set as ‘default’.

∙DC Input: For connection to the DC 5V power adapter.

∙Uplink port: For connecting the Wireless Gateway to an upstream hub or switch with an ordinary “straight-through” (as opposed to cross-wired) Ethernet cable. This port and the LAN port next to it cannot be used at the same time; they are simply differently wired ports for LAN port 1.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Wireless Gateway Users Guide CE Mark Warning FCC WarningTable of Contents Appendix Introduction FeaturesPage Back Panel External ComponentsFront Panel LPT LED FaultyWeb Configuration Page Basic Setup Router Name Basic Setup Broadband RouterLocal LAN Global WAN Mode DNS IP Addresses WAN Port MAC Save/CancelWireless Channel Basic Setup Wireless APTx Bit Rate Print Port Basic Setup Print ServerAppleTalk Save/Cancel Basic Setup Admin Password Advanced Settings Advanced Settings Dhcp Server Address Range EnableReserve Table Lease TimeSave/Cancel Advanced Settings Port Forwarding TCP Port to IP Forwarding DMZ Host Go to Advanced Settings Port OpenApplication Define Port Open List Page Static Routing Advanced Settings RoutingDynamic Routing NAT/Router Mode Page Advanced Settings Filters Protocols Filter Users FilterBlock WAN Request NetBIOS over TCP/IP FilterPage Advanced Settings Manager Console Log and Filter Manager ConsoleSchedule Connection Save/Cancel Define User List Advanced Settings Wireless AccessAccess Control Enable/Disable Advanced Settings Wireless EncryptionInput Format Encrypt Data Transmissions UsingKey 1 through Key Save/Cancel Advanced Settings Wireless Bridge Broadcast/Multicast Filter Protocol FiltersPage Save/Cancel ∙ Dhcp InformationInformation Device Information Dhcp Information Routing Information Users Information Connections Information WAN Link Information Printer Status Information Wireless Stations Information Wireless Tallies Page Tools Tools ResetTools Print Test Tools Factory ResetTools PPPoE Connect and PPPoE Disconnect Page Help Device Utility InstallationUsing Device Utility Changing IP Address Firmware UpgradeSpecifications

Wireless Gateway specifications

The Nlynx Wireless Gateway stands out as a cutting-edge solution designed to meet the ever-growing demands of modern connectivity. Aimed primarily at businesses and industrial applications, this device combines robust technology with user-friendly features, positioning itself as a reliable hub in various environments.

One of the main features of the Nlynx Wireless Gateway is its dual-band wireless capability. It supports both 2.4 GHz and 5 GHz frequency bands, enabling devices to connect to the most suitable frequency for optimal performance. This dual-band support is critical in reducing congestion and enhancing data throughput, ensuring that crucial operations run smoothly without interruptions.

In terms of connectivity, the Nlynx Wireless Gateway supports multiple network protocols, including Wi-Fi, Ethernet, and cellular connectivity. This versatility allows it to seamlessly integrate into a variety of existing infrastructure, whether it's connecting legacy devices via Ethernet or providing wireless access in areas where cabling is impractical. The gateway also supports advanced MIMO (Multiple Input Multiple Output) technology, which significantly increases the range and reliability of wireless signals by utilizing multiple antennas for transmitting and receiving data.

Security is a top priority for the Nlynx Wireless Gateway. It incorporates advanced encryption protocols such as WPA3, ensuring that data transmitted over the network remains secure from unauthorized access. Additionally, it features built-in firewall capabilities and supports VPN connections, providing an extra layer of protection for sensitive information.

The management of the Nlynx Wireless Gateway is made effortless through its intuitive web-based interface. Users can easily monitor network performance, manage connected devices, and configure settings without needing extensive technical knowledge. Furthermore, it supports firmware updates over-the-air, ensuring that users always have the latest security patches and features.

Power over Ethernet (PoE) support is another characteristic that enhances the flexibility of the Nlynx Wireless Gateway. By allowing the device to receive power through the Ethernet cable, installation becomes simpler and more streamlined, particularly in challenging locations where power outlets are limited.

Overall, the Nlynx Wireless Gateway is a feature-rich device that encompasses advanced networking technologies, exceptional security measures, and user-friendly management tools, making it an ideal choice for businesses looking to enhance their connectivity solutions while ensuring a robust and reliable network infrastructure.
Top Page Image Contents