Reference Manual for the ProSafe Network Management System NMS100
Access Parameters
1.Select the Access tab to set access parameters for a Device, Link, or Network object. For a description of access parameters, please see Table
2.To change an access parameter, first select the parameter name in the Attrib table.
The selected parameter name is displayed in the Name box and the current value is in the Value
3.In the Value
•Note that the Value
•When editing multiple objects, any access parameter that has a different value for different objects is shown as #####. Changing these attributes will set the new value for all selected objects.
The following table describes the access parameters available in the Object Properties Access tab for Device, Link, and Network objects. Access parameters are not valid for Subnet and Goto object types.
Table | Object Properties Access tab | ||
|
|
|
|
Attribute Name |
| Description |
|
|
|
| |
Read Access Mode | The mode used for polling and SNMP Read operations. Select ICMP |
| |
|
| (Ping) for |
|
|
| devices. Select NONE (TCP Only) for devices that will only have TCP |
|
|
| services polled. |
|
Read/Write Access Mode | The mode used for SNMP Write operations. Select SNMP V1 for |
| |
|
| standard SNMP devices. You can also force this mode to be used for |
|
|
| both Read and Write operations from your console (not polling |
|
|
| operations) by using the Read/Write button on the ProSafe NMS frame |
|
|
| button bar (third button from left). |
|
Read Community | The Community name used for SNMP V1/V2c operations when the |
| |
|
| Read Access Mode is used. |
|
|
|
|
|
Data and Statistics |
September 2004