NETGEAR XAVB5501-100NAS, XAV5501-100NAS user manual Appendix A. Supplemental Information

Page 26

XAV5501 Powerline AV+ 500 Adapter User Manual

•Operate the product only from the type of external power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your service provider or local power company.

•To help avoid damaging your system, be sure that the voltage selection switch (if provided) on the power supply is set to match the power available at your location:

•110 volts (V), 60 hertz (Hz) in most of North and South America and some Far Eastern countries such as South Korea and Taiwan.

•100 V, 50 Hz in eastern Japan and 100 V, 60 Hz in western Japan.

•230 V, 50 Hz in most of Europe, the Middle East, and the Far East.

•Be sure that attached devices are electrically rated to operate with the power available in your location.

•To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical outlets.

•Use only approved power cables. If you have not been provided with a power cable for your system or for any AC powered option intended for your system, purchase a power cable that is approved for use in your country. The power cable must be rated for the product and for the voltage and current marked on the product’s electrical ratings label. The voltage and current rating of the cable should be greater than the ratings marked on the product.

•The peripheral power cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable.

•Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.

•To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

•Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure that nothing rests on any cables.

•Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications.

•Always follow your local and national wiring rules.

•Move products with care; ensure that all casters and stabilizers are firmly connected to the system. Avoid sudden stops and uneven surfaces.

26 Appendix A. Supplemental Information

Page 25 Page 27
Image 26
Page 25 Page 27
Contents XAV5501 Powerline AV+ Adapter Statement of Conditions Technical SupportTrademarks Revision HistoryContents Installation and Basic Configuration How the Powerline AV+ 500 Adapter Fits in Your NetworkXAV5501 Product Label Powerline XAV5501 Adapter FeaturesLED and Feature Descriptions Model Number Feature Descriptions Installing Your Powerline XAV5501 Adapter Prepare for InstallationConnecting a Powerline AV+ 500 Adapter to the Router Connecting the XAV5501 to a RouterTo add Powerline adapters Adding Adapters to Your NetworkUnderstanding Powerline Network Security Set the Encryption KeyTo set a private encryption key Installing the XAV5501 Powerline Utility To install the XAV5501 Powerline UtilityPowerline Utility Screen Navigate to Start Programs Netgear Netgear Powerline UtilityChange the Name of a Powerline Device Powerline Utility main screenSet Encryption Keys To name any Powerline device in your Powerline networkTurn LEDs On or Off Click Apply Security to Selected Devices Set Up Quality of Service QoSTo set the Encryption Key for the Powerline network QoS Setup screen Using the XAV5501 Powerline Utility To prioritize by general application typeTo reset to factory defaults Reset a Device to Factory SettingsAdd a Device to a Powerline Network Click the Apply Security to Selected Devices button Security IconTo add a device from a locally connected computer Return to the Default Network Encryption Key Click the Use Default Encryption Key buttonProduct Registration and Support Basic FunctioningLED Troubleshooting Tips LED and Feature TroubleshootingProblems after Changing the Network Encryption Key Technical Specifications Supplemental InformationSafety Information Electromagnetic EmissionsAppendix A. Supplemental Information Netgear Powerline Products Notification of ComplianceRegulatory Compliance Information FCC Requirements for Operation in the United StatesFCC Declaration Of Conformity GPL License Agreement Index Index
Top Page Image Contents