NETGEAR WG102NA manual Configuring Network Authentication

Page 38

NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual

Authentication/Access Control Radius Server Configuration. This configuration is required for authentication using Radius. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server

IP Address. The IP address of the Radius Server. The default is 0.0.0.0.

Port Number. Port number of the Radius Server. The default is 1812.

Shared Secret. This is shared between the Wireless Access Point and the Radius Server while authenticating the supplicant.

Re-authentication Time. The time interval in seconds after which the supplicant will be authenticated again with the Radius Server. The default is 3600 seconds.

Global-keyRe-Key Time. Check on this option to enable Re-keying of Global Key. The Global Key Re-Key can be done based on time interval in seconds or number of packets exchanged using the global key. The default is 3600 seconds.

Update if any station disassociates. Check on this option to refresh global key when any stations disassociated with wireless Access Point.

Accounting Radius Server Configuration. This configuration is required for accounting using Radius Server. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server.

IP Address. The IP address of the Radius Server. The default is 0.0.0.0.

Port Number. Port number of the Radius Server. The default is 1813.

Shared Secret. This is shared between the Wireless Access Point and the Radius Server while authenticating the supplicant.

Configuring Network Authentication

Follow the steps below:

1.Connect to the WG102 Access Point.

Log in at the default LAN address of http://192.168.0.229 with the user name of admin and default password of password, or using the LAN address and password that you set up.

2.If you are using Radius Server Settings, set them up first, as described in “Configuring the Radius Server Settings” on page 2-7.

2-8

Configuring Security

v1.0, July 2008

Image 38
Contents NETGEAR, Inc Statement of Conditions Technical SupportTrademarks FCC StatementPlacement and Range Guidelines ANT24O5Industry Canada Compliance Statement Europe EU Declaration of ConformityAntenna Statement for the European Community MalteseBestätigung des Herstellers/Importeurs Certificate of the Manufacturer/ImporterProduct and Publication Details Viii Contents Chapter Management Appendix B Related Documents Xii Contents About This Manual Conventions, Formats, and ScopeHow to Use This Manual How to Print This ManualRevision History V1.0, July System Requirements Chapter Basic Installation and ConfigurationWhat Is In the Box? Hardware Description Front PanelRear Panel Cabling RequirementsWireless Equipment Placement and Range Guidelines Installing the WG102 Access PointV1.0, July V1.0, July V1.0, July V1.0, July Logging in to the Wireless Access Point Basic IP Settings V1.0, July Wireless Settings Setting up and Testing Basic Wireless Connectivity V1.0, July Chapter Configuring Security Wireless Data Security OptionsSecurity Profiles Profile Definition Network Authentication Network Authentication TypesWireless Client Security Separation Data EncryptionBefore You Change the Ssid and WEP Settings WPA Radius SettingsConfiguring the Radius Server Settings Configuring Network Authentication V1.0, July Restricting Wireless Access by MAC Address Entering WEP Data Encryption KeysSelect the Turn Access Control On check box V1.0, July General Information Chapter ManagementViewing Information General Information Fields Activity Log Statistics Available Wireless Station List Available Wireless Station ListUpgrading the Wireless Access Point Firmware Configuration File Management Erasing the Configuration Changing the Administrator PasswordBacking up and Restoring the Configuration Using the Reset Button to Restore Factory Default SettingsSnmp Remote Management V1.0, July Chapter Advanced Configuration Hotspot SettingsConfiguring Advanced Wireless Settings Wireless Bridging and Repeating Point-to-Point Bridge Configuration Multi-Point Bridge Configuration Point-to-Multi-PointV1.0, July Repeater with Wireless Client Association V1.0, July Wireless LAN Activity Light Is Off Chapter TroubleshootingNo Lights Are Lit on the Access Point Cannot Connect to the WG102 Access Point LAN Light is OffWhen I Enter a URL or IP Address I Get a Timeout Error Using the Reset Button to Restore Factory Default SettingsV1.0, July Appendix a Factory Default Settings and Specifications Factory Default SettingsTechnical Specifications V1.0, July V1.0, July Appendix B Related Documents Document LinkRelated Documents