NETGEAR WG102NA manual Technical Specifications

NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual

Technical Specifications

Parameter	NETGEAR WG102 ProSafe 802.11g Wireless Access Point
Network Management	Web-based configuration and status monitoring
Maximum Clients	Limited by the amount of wireless network traffic generated by each node;
	typically 15 to 20 nodes.
Status LEDs	Power/Ethernet LAN/Wireless LAN/Test
Power Adapter	12V DC, 1 A
Electromagnetic Compliance	FCC Part 15 Class B, CE, C-TICK, Medical EMC EN60601
Environmental Specifications	Operating temperature: 0 to 45° C
	Operating humidity: 5-95%, non-condensing
Wireless
Data Encoding:	802.11b: 1 and 2 Mbps, Direct Sequence Spread Spectrum (DSSS)
	802.11b: 5.5 and 11 Mbps, Complementary Code Keying (CCK)
	802.11g: All rates, Orthogonal Frequency Division Multiplexing (OFDM)
Maximum Computers Per	Limited by the amount of wireless network traffic generated by each node.
Wireless Network:	Typically 30-70 nodes.
802.11b and g	1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, and 108 Mbps (Auto-rate
Radio Data Rate	capable)
802.11b and g	2.412 ~ 2.462 GHz (North America), Channels 1-11
Operating Frequencies and	2.412 ~ 2.472 GHz (Europe including France and Spain, and Japan),
Channels	Channels 1-13
802.11b and g	802.11b mode, 1 to 11Mbps: +19 dBm*
Typical Maximum	802.11g mode, 6 to 24 Mbps: +18 dBm*
Transmit Power	802.11g mode, 36/48/54 Mbps: +17/16/15 dBm*
	*Note: Maximum transmit power varies based on country or region selection
	to ensure local regulatory compliance.

A-2 Factory Default Settings and Specifications

v1.0, July 2008