NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
3. Set the Network Authentication that you want to use.
Figure
a.On the Security menu, click Security Profiles Settings.
b.Select the profile that you want.
c.Click Edit to view the Security Profiles Configuration menu.
d.Choose the type of Network Authentication that you want from the list.
Note: WEP can be used with Open System or Shared Key. Choose the encryption strength, and then enter the Keys as explained in “Entering WEP Data Encryption Keys” on page
e. Click Apply to save your settings.
Note: If you use a wireless computer to configure WEP settings, you will be disconnected when you click Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access point from a wired computer to make any further changes.
Configuring Security |