
User’s Manual for the NETGEAR Double 108 Mbps Wireless PC Card
WG511U Default Wireless Configuration Settings
If this is a new wireless network installation, use the factory default settings to set up the network and verify wireless connectivity. If this is an addition to an existing wireless network, you will need to identify the wireless configuration and security parameters already defined.
Your WG511U factory default basic settings are:
•Wireless Network Name (SSID): NETGEAR_11g
Note: In order for the WG511U Wireless PC Card to communicate with a wireless access point or wireless adapter, all devices must be configured with the same wireless network name (SSID).
•Network Mode (Infrastructure or
•Data security
•Default
The section below provides instructions for setting up the WG511U for basic wireless connectivity to an access point. The procedures below provide
Basic Setup |
August 2004