NETGEAR WG511U user manual Below Word Meaning

User’s Manual for the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U

Verify wireless connectivity to your network.

a.Verify that your Connection and Status Monitor information matches your wireless network.

b.Check the two LEDs on the WG511U:

Table 3-2:		LED Descriptions
	LED 1	LED 2
	(below the	(below the
	word	word	Meaning
	NETGEAR	NETGEAR
	on the left)	on the right)
	Slow blink	OFF	Power save mode (default from power up or reset)
	Alternate	Alternate	Looking for network association
	blink	blink	Power LED goes ON; Network LED is OFF; then Power
			LED goes OFF and Network LED goes ON
	Slow blink	Slow blink	Associated or joined with network; no activity
	Fast blink	Fast blink	Associated or joined with network; blink rate increases
			with activity on the network over the air or locally on the
			network
c. Verify connectivity to the Internet or network resources.

Note: If you are unable to connect, see troubleshooting tips in the Basic Installation section of the Reference Manual on the NETGEAR Double 108 Mbps Wireless PC Card 32-bit CardBus WG511U Resource CD.

Basic Setup 3-11

August 2004