User’s Manual for the NETGEAR Double 108 Mbps Wireless PC Card
WEP Security Settings Worksheet
Print this form, fill in the configuration parameters and put it in a safe place for possible future reference. For an existing wireless network, the person who set up the network will be able to provide this information.
•Wireless Network Name (SSID)
The Service Set Identification (SSID) identifies the wireless local area network. For the access point and wireless nodes to communicate with each other, all must be configured with the same SSID.
Note: Some wireless access points will not broadcast their SSID as a security feature. In such a case, you will need to get the SSID from the wireless network administrator.
Wireless network name (SSID): ______________________________
•WEP Security Encryption Key
The default WEP encryption key number is 1, and the default key size is 64 bits.
Note: The key number as well as the key value used by all wireless nodes must be the same. If yours is different, you will not be able to connect.
WEP Encryption Key Size, circle one: 64 or 128 bits
WEP Encryption Passphrase (case sensitive), if used: ____________________________
A Passphrase is used to automatically generate the WEP hexadecimal numbers for the key. If the wireless network Access Point uses a Passphrase, you can also use that here. Otherwise, you will have to manually enter the hexadecimal numbers.
Note: Not all wireless networks support the Passphrase method of key generation. In such settings, instead of Passphrase, use the Enter Key Manually option.
WEP Hexadecimal Numbers (not case sensitive): ______________________________
—
—
Use the procedures below to configure WEP security settings in the WG511U.
Wireless Security Configuration |
August 2004