GS748T Software User Manual
6.Make a note of the displayed IP address assigned by the DHCP server. You will need this value to access the switch directly from a web browser (without using Smart Wizard Discovery).
7.Select your switch by clicking on the line that shows it. Then click on the Web Access button. The discovery utility displays a login window similar to the following:
Figure
Use your web browser to manage your switch. The default password is ‘password’.
Network without DHCP Server
This section describes how to set up your switch in a network without a DHCP server, and is divided into the following tasks:
•Manually assign network parameters for your switch
•Configure the NIC settings on the host PC
•Log in to the
Getting |