NETGEAR FSM726 manual

Page 19

2.Select ‘C’ for Set-up

3.Select ‘B’ for IP configuration

4.Enter in the IP address, Subnet mask, and Default Gateway

5.Hit ‘Q’ twice to exit to the main menu

6.Select ‘D’ for the Tools page

7.Select ‘A’ for Save Configurations to NVRAM, and confirm with a ‘Y’

8.Select ‘C’ for Reset Switch, and confirm with a ‘Y’

To continue using the console interface to manage your switch, e.g. set GBIC ports, hit ‘ESC’ to go to the main menu. To set the GBIC ports, go to Set-up, then Port Configuration. Use your arrow keys to move the curser down to port 25 or 26, and hit the space bar to toggle between the RJ-45 port and the GBIC port.

To learn more about the managed features on your switch, refer to the User Manual on the GearBox for Managed Switches CD-ROM.

Page 18 of 18

Image 19

Contents Page Statement of Conditions Internet/World Wide Web Contents Figures Overview IntroductionFeatures Page Verify that your package contains the following Package ContentsFront and Back Panels Physical Description10/100 Mbps RJ-45 Ports Gigabit Ethernet Ports RJ-45 and Gbic module bay Console Port LED DescriptionsReset Button Preparing the Site InstallationEnvironmental Installing the Switch on a Flat Surface Installing the SwitchChecking the Installation Applying AC PowerInstalling a Gbic Module Connecting Devices to the SwitchInstalling a Gigabit Ethernet Module into an FSM726 System Information Page Interface Appendix a Technical SpecificationsNetwork Protocol and Standards Compatibility ManagementElectromagnetic Immunity Safety Power SupplyPhysical Dimensions Environmental SpecificationsNetwork Adapter Cards Appendix B TroubleshootingTroubleshooting Chart Additional Troubleshooting SuggestionsSwitch Integrity ConfigurationAuto Negotiation Appendix C Default Settings