APPENDIX C: Default Settings
This appendix provides the default settings for the NETGEAR Model FSM726 Managed Switch.
Feature | FSM726 Default Setting |
|
|
Port Speed | |
Port Duplex | |
Flow Control (half duplex) | Enabled |
Flow Control (full duplex) | Enabled |
Broadcast Storm Control | Enabled (3000 packets per second) |
Gigabit ports | |
IP Configuration | DHCP enabled |
Password protection | Disabled |
User Name | Admin |
Password | 1234 |
VLAN | All ports belong to Default VLAN (VLAN 1) as untagged ports |
IP Multicast Filtering | Disabled |
Spanning Tree Protocol | Enabled |
Fast Link | Disabled |
Traffic Prioritization |
|
802.1p | Optimized for flow control, all ports normal priority |
DiffServe | |
MAC address aging | 300 seconds |
SNMP Community | Public (you must add application to Host table before switch |
| will respond to SNMP requests) |
Page 23 of 23