NETGEAR FS 524S, FS 517TS manual Category 5 Cable Specifications, Twisted Pair Cables

Category 5 Cable Specifications

Ensure that the fiber cable is crossed over to guarantee link.

Table C-1 lists the electrical requirements of Category 5 UTP cable.

Table C-1. Electrical Requirements of Category 5 Cable

Specifications	Category 5 Cable Requirements
Number of pairs	Four
Impedance	100 Ω ± 15%
Mutual capacitance at 1 KHz	≤ 5.6 nF per 100 m
Maximum attenuation
(dB per 100 m, at 20° C)	at 4 MHz: 8.2
	at 31 MHz: 11.7
	at 100 MHz: 22.0
NEXT loss (dB minimum)	at 16 MHz: 44
	at 31 MHz: 39
	at 100 MHz: 32

Twisted Pair Cables

For two devices to communicate, the transmitter of each device must be connected to the receiver of the other device. The crossover function is usually implemented internally as part of the circuitry in the device. Computers and workstation adapter cards are usually media-dependent interface ports, called MDI or uplink ports. Most repeaters and switch ports are configured as media-dependent interfaces with built-in crossover ports, called MDI-X or normal ports.

cabling guidelines C-3