GS605AV_IG_08Dec09.fm Page 2 Tuesday, December 8, 2009 7:53 PM
Technical Specifications
| Technical Specifications |
|
|
Standards compatibility | Specifications IEEE 802.3i |
| |
| Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1p |
| Priority Tags; Jumbo frame (up to 9216 bytes); compatible |
| with Windows®, Mac® OS, NetWare™, Linux® |
|
|
Network interface | |
| T Ethernet interface |
|
|
DC Power | 7.5W max and 7.5V @1A DC input |
|
|
Power consumption | 2.7W (max) |
|
|
Physical dimensions | 5.40 x 4.01 x 1.30 in (137 x 102 x 33 mm) |
(W x D x H) |
|
|
|
Weight | 0.204 Kg (0.45 lbs) |
|
|
Operating temperature | 0 to 40C (32 to 104F) |
|
|
Operating humidity | 10% to 90% relative humidity, noncondensing |
|
|
Electromagnetic | FCC Part 15, Class B; VCCI Class B; |
compliance | CE Class B, including EN 55022 and EN 55024 |
|
|
Safety agency approvals | CE mark |
|
|
Dark green RJ45 connector: highest priority | |
| Light green RJ45 connector: medium priority |
| Yellow RJ45 connector: lowest priority |
|
|
ACL rules | Prioritize audio/video applications |
|
|
Green mode | Auto |
| Auto green mode detects cable length and adjusts power |
| usage |
|
|
Address database size | 8K |
|
|
Packet buffer memory | 128 KB |
|
|
MAC address aging | 300 sec |
|
|
Switch bandwidth | 10 Gbps |
|
|
Forwarding mode | |
|
|
| Technical Specifications |
|
|
Performance Specifications | |
|
|
Frame filter rate | 14,880 frames/sec max for 10M port |
| 148,800 frames/sec max for 100M port |
| 1,488,000 frames/sec for 1000M port |
|
|
Frame forward rate | 14,880 frames/sec max for 10M port |
| 148,800 frames/sec max for 100M port |
| 1,488,000 frames/sec max for 1000M port |
|
|
Network latency (using | 10Mbps: 34us max |
100Mbps: 5.5us max | |
| 1000Mbps: 3us max |
|
|
VCCI Class B Statement
FCC Statement
Troubleshooting
The Power light is not lit.
The switch has no power.
•Make sure that the power cord is correctly connected to the switch.
•Make sure that the power adapter is connected to a functioning power outlet. If it is in a power strip, make sure that the power strip is turned on. If the socket is controlled by a light switch, make sure that the switch is in the on position.
•Make sure that you are using the NETGEAR power adapter supplied with your switch.
The Port number light is not lit for a connected device or stays on continuously.
There is a hardware connection problem.
•Make sure that the cable connectors are securely plugged in at the switch and the device.
•Make sure that the connected device is turned on.
•If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure that the card or adapter is installed correctly and is working.
•Make sure that the cable is less than 328 feet (100 meters).
•Make sure that you use a high quality cable, especially for the gigabit connection.
Technical Support
Thank you for selecting NETGEAR products.
After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product, and use it to register your product at http://www.NETGEAR.com/register.
Registration on the website or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product.
Go to http://kbserver.netgear.com for product updates and Web support. GPL may be included in this product; go to ftp://downloads.netgear.com/files/GPLnotice.pdf to view the GPL license agreement.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.
© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.
November 2009