9. TROUBLESHOOTING
Problem | Cause | Solution |
|
|
|
|
|
Power does not turn on. | Fuse is blown. | Replace with a fuse of the same |
|
(No sound is produced.) |
| amperage. If the fuse blows again, |
|
|
| consult your store of purchase. |
|
|
|
| English |
| Incorrect wiring. | Consult your store of purchase. | |
|
| ||
|
|
|
|
Compact disc cannot be | Another compact disc is | Eject the compact disc before loading |
|
loaded. | already loaded. | the new one. |
|
|
|
|
|
Sound skips or is noisy. | Compact disc is dirty. | Clean the compact disc with a soft |
|
|
| cloth. |
|
|
|
|
|
| Compact disc is heavily | Replace with a compact disc with no |
|
| scratched or warped. | scratches. |
|
|
|
|
|
Sound is bad directly after | Water droplets may form | Let dry for about 1 hour with the |
|
power is turned on. | on the internal lens when | power on. |
|
| the car is parked in a |
|
|
| humid place. |
|
|
|
|
|
|
10. ERROR DISPLAYS
■To protect the system, this unit has been equipped with self diagnostic functions. If a fault arises, a warning is issued by various error displays. Follow the corrective measures and remove the fault.
Error Display | Corrective Measure |
ER2 | This error display indicates that a fault has arisen in the |
mechanism of the source unit (for example, the disc cannot be | |
| ejected). |
| ➜ Check the source unit. |
|
|
ER3 | This error display indicates that the pickup focus is off because |
of a scratched disc or some other factor during source unit play. | |
| ➜ Check the compact disc. |
|
|
ER6 | This indicates that the CD’s TOC (table of contents) cannot be |
read, for example because the selected disc is | |
|
|
M335/M235 13