5.5 Wireless Bridge
The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to configure the wireless bridge features of the wireless LAN interface.
A wireless bridge is utilised to extend your WiFi network coverage and enable distant computers to access network resources. Click Save/Apply to implement new configuration settings.
FEATURE | DESCRIPTION |
|
|
AP Mode | Selecting Wireless Bridge (or Wireless Distribution System) disables Access Point (AP) |
| functionality. Selecting AP enables Access Point mode, wireless bridge functionality will |
| still be available and wireless stations will be able to associate to the AP. |
|
|
Bridge Restrict | Selecting Enabled or Enabled (Scan) allows wireless bridge restriction. Only those bridges |
| selected in “Remote Bridges” will be granted access. Enabled (Scan) scans the detected |
| wireless networks and allows you to select one to connect to. Click Refresh to update the |
| station list when Enabled (Scan) is selected. |
|
|
5.6 Station Info
The following screen appears when you select Station Info, and shows authenticated wireless stations and their status. Click the Refresh button to update the list of stations in the WLAN.
FEATURE
MAC
Associated
Authorized
DESCRIPTION
This shows the unique
Lists all the stations that are associated with the Access Point, along with the amount of time since packets were transferred to and from each station. If a station is idle for too long, it is removed from this list.
Lists those devices with authorized access.
3G WiFi Router User Guide |
| |
24 | www.netcomm.com.au | |