7.4.2 URL Filter
This enables you to allow or prevent access to specific websites based on the address being entered to access it.
Select either “To Block” or “To Allow” depending on your current IP Filtering (see section 7.3 Security) as per the screenshot below.
You can then click “Add” to add a new URL filter.
You can then enter the URL and the port number as prompted on the page to enter a new URL filter and click “Save/Apply”.
7.5 Routing
Static Route settings can be found in the Routing link as illustrated below.
7.5.1 Static Route
The Static Route screen displays the configured static routes. Click the Add or Remove buttons to change settings.
Click Add to display the following screen.
Enter the Destination Network Address, Subnet Mask, Gateway IP Address and/or WAN Interface. Click Save/Apply to add the entry to the routing table.
3G WiFi Router User Guide |
| |
38 | www.netcomm.com.au | |