NetComm YML-O-3G19W manual Restore Default, Update Firmware

Page 27

NETCOMM LIBERTY™ SERIES - 3G WiFi Router

6.1.3Restore Default

The following screen appears when selecting Restore Default. By clicking on the Restore Default Settings button, you can restore your Routers default firmware settings. To restore system settings, reboot your Router

NOTE:

The default settings can be found in section 3.1 Default Settings.

Once you have selected the Restore Default Settings button, the following screen will appear. Close the window and wait 2 minutes before reopening your browser. If required, reconfigure your PCs IP address to match your new configuration (see section 3.2 TCP/IP Settings for details).

After a successful reboot, the browser will return to the Device Info screen. If the browser does not refresh to the default screen, close and restart the browser.

NOTE:

The Restore Default function has the same effect as the reset button. The device board hardware and the boot loader support the reset to default button. If the

 

reset button is continuously pushed for more than 5 seconds (and not more than 12 seconds), the boot loader will erase the configuration settings saved on flash

 

memory.

6.1.4Update Firmware

The following screen appears when selecting Update Firmware. By following the steps on the page, you can update your Routers firmware. Manual device upgrades from a locally stored file can also be performed.

1.Obtain an updated software image file.

2.Enter the path and filename of the firmware image file in the Software File Name field or click the Browse button to locate the image file.

3.Click the Update Firmware button once to upload and install the file.

NOTE:

The update process will take about 2 minutes to complete. The Router will reboot and the browser window will refresh to the default screen upon successful

 

installation.

It is recommended that you compare the Software Version at the top of the Basic screen (WUI homepage) with the firmware version installed, to confirm the installation was successful.

YML-O-3G19W

3G WiFi Router User Guide

www.netcomm.com.au

27

Image 27
Contents User Guide Preface Table of Contents Introduction Features Package ContentsIntroduction Rear Panel LED IndicatorsQuick Setup Setup Procedure Quick SetupWeb User Interface Windows XP Default SettingsTCP/IP Settings Web User InterfaceWindows Vista/7 Static ModeMAC OSX Netcomm Liberty Series 3G WiFi Router Web User Interface Homepage Login Procedure3G Settings Setup 3G SettingsPIN Configuration Network SelectionPIN Code Protection PIN Code Change Wireless Option Description WirelessOption Description SecurityRTS Threshold ConfigurationMAC Filter Feature DescriptionStation Info Wireless BridgeManagement Management Device SettingsBackup Settings Update SettingsUpdate Firmware Restore DefaultConfigure Snmp agent Setting up Snmp agentSimple Network Time Protocol Sntp Access Control ServicesPasswords Save and Reboot Advanced Setup Local Area Network LAN Advanced SetupNetwork Address Translation NAT Port ForwardingPort Triggering Demilitarized DMZ Host Outgoing IP Filter IP FilteringIncoming IP Filter Time of Day Restrictions Parental ControlRouting URL FilterStatic Route Dynamic DNS Domain Name Servers DNSStatus Status DiagnosticsSystem Log Imei 3G NetworkStatistics LAN Statistics2 3G Statistics ARP RoutePing Dynamic Host Configuration Protocol DhcpAppendix Customer Information Appendices Legal & Regulatory InformationIC Radiation Exposure Statement ISC Dhcp V2 P5 Preamble GNU General Public License3G WiFi Router User Guide YML-O-3G19W No Warranty Limitations of Warranty Product WarrantyProduct Warranty Technical Support