Advanced Setup, Local Area Network LAN

7. Advanced Setup

This chapter explains the advanced setup options for your Router:

This screen allows you to configure the Local Area Network (LAN) interface on your Router.

See the field descriptions below for more details.

OPTION	DESCRIPTION

IP Address	Enter the IP address for the LAN interface

Subnet Mask	Enter the subnet mask for the LAN interface

Enable UPnP	Tick the box to enable Universal Plug and Play

Enable Half-Bridge	The Router can be setup as a half-transparent bridge to cope with some special applications
	such as VPN pass-through. By default half-bridge is off..

Dynamic Host Configuration Protocol	Select Enable DHCP server and enter your starting and ending IP addresses and the lease
(DHCP) Server	time. This setting configures the router to automatically assign the IP address, default
	gateway and DNS server addresses to every DHCP client on your LAN.

Option 42, 66, 150, 160	These options are used for special DHCP setup.

Static IP Lease List	To specify the IP address assigned through DHCP according to the MAC address of the
	hosts connected to the router.

Configure a second IP address by ticking the checkbox shown below and enter the following information:

		IP Address:	Enter the secondary IP address for the LAN interface.

		Subnet Mask:	Enter the secondary subnet mask for the LAN interface.

NOTE:	The Save button saves new settings to allow continued configuration, while the Save/Reboot button not only saves new settings but also reboots the device to
	apply the new configuration (i.e. all new settings).

3G WiFi Router User Guide	YML-O-3G19W
32	www.netcomm.com.au