4. 3G Settings
Select your 3G Mobile Broadband service settings according to predefined or custom profiles. Setup instructions are provided in the following sections for your assistance.
This menu includes 3G Mobile Broadband service Setup, Network Selection and PIN Configuration.
4.1 Setup
NOTE: | Sections 8.3 and 8.4.2 also provide information about the 3G Mobile Broadband service. |
Your Service Provider will provide the information required to complete the first time setup instructions below. This includes profile, username and password. Only complete those steps for which you have information and skip the others.
1.If your SIM card is not inserted into the Router, then do so now.
2.Type the APN in the APN field. Authentication Method should be provided by your Internet service provider; or just leave it set to AUTO if not required. If you have not received a username and password, leave these fields empty.
Select IP compression and Data compression to be ON or OFF. By default they are set to off.
3.Click the Save button to save the new settings.
4.Press the Connect button to reboot the router and to connect to Internet. After reboot, the Device Info for
The 3G network box in the WUI Basic screen should indicate an active connection, as shown below. The 3G and Internet LEDs on the front panel of the Router should also be blinking.
If the LEDs are off, then either your profile settings are incorrect, the SIM card is not working or the service network is unavailable. In either case, contact Technical Support for further instructions.
NOTE: | If the LEDs light up in an on/off pattern moving from left to right this indicates that your SIM is PIN Locked; please see the 4.3.1 PIN Lock Off section for instructions |
| on how to fix this. |
3G WiFi Router User Guide |
| |
16 | www.netcomm.com.au | |