Clarion DXZ535 Operations Common to Each Mode, Turning the screen saver function on or off

Operations Common to Each Mode

4.Press the [a] or [d] button to select the hour or the minute.

5.Turn the [ROTARY] knob clockwise or coun- terclockwise to set the correct time.

∗ The clock is displayed in 12-hour format.

6.Press the [ ] button to store the time into memory.

7.Press the [T] button to return to the previous mode.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is re- set. While setting the clock, if another button or operation is selected, the clock set mode is can- celed.

Turning the screen saver function on or off

This unit is provided with the screen saver func- tion which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display in a random order. You can turn on and off this function.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “SS”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “SCRN SVR”.

3.Press the [ ] button.

4.Turn the [ROTARY] knob clockwise or coun- terclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:

OFF ➜ SS ➜ MESSAGE

5.Press the [ ] button to store the setting.

6.Press the [T] button to return to the previous mode.

∗The following illustration presents one of the patterns which are shown when the screen saver function is turned on.

Entering MESSAGE INFORMATION

Message up to 30 characters long can be stored in memory and displayed for CD, CD changer and TV stations.

*The factory default setting is “WELCOME TO CLARION”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “IN- PUT”.

3.Press the [] button.

4.Press the [a] or [d] button to move the cursor.

5.Press the [D] button to select a character. Each time you press the [D] button, the char- acter changes in the following orders: Numbers ➜ Symbols ➜ Capital letters ➜ Numbers…

6.Turn the [ROTARY] knob to select the de- sired character.

7.Repeat step 4 to 6 to enter up to 30 charac- ters for message.

8.Press and hold the [] button for 2 sec- onds or longer to store the message in memory and cancel input message.

Setting the button illumination

Press the [COLOR] button to select a color type. Each time you press the [COLOR] button, the type changes in the following orders:

CLR SCAN ➜ RED ➜ MANDARIN ➜ OR- ANGE ➜ AMBER ➜ YELLOW ➜ Y-GREEN ➜

LIME ➜ GREEN ➜ D-GREEN ➜ USER ➜ CLR

SCAN…

●Setting CLR SCAN mode

As selecting “CLR SCAN”, the color automati- cally changes in the following orders:

CLR SCAN ➜ RED ➜ MANDARIN ➜ OR- ANGE ➜ AMBER ➜ YELLOW ➜ Y-GREEN ➜

LIME ➜ GREEN ➜ D-GREEN ➜ USER ➜ CLR

SCAN…

∗The factory default setting is “CLR SCAN”.

∗During change the color’s name not appear.

∗After 3 second the color change to the other.

English

DXZ535 19