Configuration Types
This section is supplied to help you connect your NB1300 ADSL Modem quickly to your network or Windows computer. The following are the most common configurations for using your NB1300 ADSL Modem.
■Basic ADSL Modem - Ethernet
■Basic ADSL Modem - USB
■Gateway - Ethernet
■Gateway - USB
Refer to the instructions in one of the following sections for the configuration you wish to use. If you wish to configure the NB1300 in a different way to the examples shown, please consult a Network Specialist for more information.
Note: If the NB1300 has already been used, we strongly recommend you reset and flush all settings of the unit by pressing and holding the RESET button on the rear of the modem for 10 seconds. Wait for the RDY light to begin pulsing before continuing.
We also recommend you change your Router’s password from the factory default before connecting it to a network or the Internet. Refer to the “Admin Password” section in the “Security” Menu.
Configuration Types
Rev. 1 - YML672 | www.netcomm.com.au |
NB1300_2 ADSL Modem | Page 11 |